Electroplating IC Packages


The electrochemical deposition (ECD) equipment market for IC packaging is heating up as 2.5D, 3D and fan-out technologies begin to ramp. [getentity id="22817" e_name="Applied Materials"]  recently rolled out an ECD system for IC packaging. In addition, Lam Research, TEL and others compete in the growing but competitive ECD equipment market for packaging. ECD—sometimes referred to as pl... » read more

OSAT Biz: Growth And Challenges


Amid a challenging business environment, the outsourced semiconductor assembly and test (OSAT) industry is projected to see steady to strong growth in a number of packaging segments this year. Right now, the [getkc id="83" kc_name="OSATs"]—which provide third-party IC-packaging and test services—are seeing brisk demand for both legacy and advanced chip packages. In addition, IDMs continu... » read more

Advanced 3D eWLB-PoP Technology


The emergence and evolution of any package technology is driven by market trends as experienced by the end application. With the maturation of the mobile market, the trends for Smartphone and other mobile devices are more than ever for lower cost. Meanwhile, a higher degree of functionality and performance, thinner profile, and longer battery life are some of the additional market drivers seen ... » read more

Packaging Wars Begin


The advanced IC-packaging market is turning into a high-stakes competitive battleground, as vendors ramp up the next wave of [getkc id="82" kc_name="2.5D"]/[getkc id="42" kc_name="3D"] technologies, high-density fan-out packages and others. At one time, the outsourced semiconductor assembly and test ([getkc id="83" comment="OSAT"]) vendors dominated and handled the chip-packaging requirement... » read more

Inside Advanced Packaging


Semiconductor Engineering sat down to discuss advanced IC-packaging, the OSAT industry, China and other topics with Ron Huemoeller, vice president of worldwide R&D at Amkor. What follows are excerpts of that conversation. SE: Where are we in advanced IC-packaging today? Huemoeller: We’ve hit the inflection point. Now we are coming to the other side of it. Regarding this need to int... » read more

Fan-Out Packaging Gains Steam


Fan-outs are creating a buzz and gaining steam in the market at a pace far beyond what anyone would have expected even at the start of the year. The approach, which has been around for several years, is a wafer-level packaging process that enables ultra-thin, high-density packages. So why the buzz? Apple is apparently moving to [getkc id="202" kc_name="fan-out"] packaging, according to an... » read more

Advanced IC Packaging Biz Heats Up


After a number of false starts and lackluster adoption, the advanced IC packaging market is finally heating up. On one front, for example, a new wave of chips based on advanced [getkc id="82" kc_name="2.5D"]/[getkc id="42" kc_name="3D"] stacked-die is entering the market. And on another front, the momentum is building for new and advanced 2D packages, such as embedded package-on-package (PoP... » read more

Different Approaches Emerge For Stacking Die


The concept of stacking die to shorten wires, improve performance, and reduce the amount of energy required to drive signals has been in research for at least the past dozen years at both IBM and Intel. And depending upon whom you ask, it could be another 2 to 10 years before it becomes a mainstream packaging approach—if it happens at all. At least part of the confusion stems from how you ... » read more

When Will 2.5D Cut Costs?


There is a constant drive to reduce costs within the semiconductor industry and, up until now, [getkc id="74" comment="Moore's Law"] provided an easy path to enable this. By adopting each smaller node, transistors were cheaper, but that is no longer the case, as explained in a recent article. The industry will need to find new technologies to make this happen and some people are looking towards... » read more

Reversing Course, With A Twist


Semiconductor Engineering is running an extended series of articles that examine the assertion that the end of Moore’s Law will have profound implications for the entire semiconductor, EDA and IP industries. Part one of this article, which focuses on the EDA industry, addressed the question about who was going to pay for future development of EDA tools for the latest production nodes. The ind... » read more

← Older posts