October 2016 - Page 2 of 12 - Semiconductor Engineering

Embedded FPGAs Going Mainstream?
By Brian Bailey - 27 Oct, 2016 - Comments: 0

Systems on chip have been made with many processing variants ranging from general-purpose CPUs to DSPs, GPUs, and custom processors that are highly optimized for certain tasks. When none of these options provide the necessary performance or consumes too much power, custom hardware takes over. But there is one type of processing element that has rarely been used in a major SoC— the [gettech id... » read more

“Eating Your Own Dog Food” When Developing An Emulator
By Frank Schirrmeister - 27 Oct, 2016 - Comments: 0

It’s a great week for emulation week with ARM TechCon happening in Silicon Valley. Palladium Z1 is a finalist for Best Product in the categories “Best Chip” and “Best System” and we started the week with an announcement that Fujitsu adopted the Cadence Palladium Z1 Enterprise Emulation Platform for their ARMv8-based “Post-K Supercomputer Development.” Cadence has faced some of the... » read more

Too Big To Simulate?
By Ann Mutschler - 27 Oct, 2016 - Comments: 2

With system design complexity set on a steady upward trajectory, there are situations in which traditional simulation just can’t keep up. The alternative—and one being used by Google, Uber, Ford, GM, Volvo, Audi and others with autonomous vehicles— is to test cars on the road and collect data for later analysis. “They're not simulating, they're just doing it all in the real world ... » read more

Overcoming The Limits Of Scaling
By Ed Sperling - 27 Oct, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss the increasing reliance on architectural choices for improvements in power, performance and area, with [getperson id="11425" comment=" Sundari Mitra"], CEO of [getentity id="22535" comment="NetSpeed Systems"]; Charlie Janac, chairman and CEO of [getentity id="22674" e_name="Arteris"]; [getperson id="11032" comment="Simon Davidmann"] CEO of [getentit... » read more

Industry 4.0 And The Internet Of Manufacturing For PCB Assembly & Fabrication
By Michael Ford - 27 Oct, 2016 - Comments: 0

For years, the PCB manufacturing industry has needed a robust real-time, comprehensive shop-floor communication standard that would include detailed, bidirectional, machine-to-machine communication, as well as shop-floor to IT computerization communication. Now, there is a solution: the Open Manufacturing Language (OML), an open communications specification managed through a community of indust... » read more

Emulation’s Footprint Grows
By Brian Bailey - 27 Oct, 2016 - Comments: 0

It wasn't that many years ago that [getkc id="30" comment="emulation"] was an expensive tool available to only a few, but it has since become indispensable for a growing number of companies. One obvious reason is the growing size of designs and the inability of [getkc id="11" kc_name="simulation"] to keep up. But emulation also has been going through a number of transformations that have made i... » read more

Introduction to ARM Cortex-M23 And Cortex-M33 Processors With TrustZone For ARMv8-M
By Arm - 27 Oct, 2016 - Comments: 0

Given the rising demand for IoT, next generation ARM® Cortex-M processors have been designed with the technology required to become the security foundation for all embedded systems. The Cortex-M23 and Cortex-M33 processors maintain the expected characteristics of the embbeded profile such as real-time deterministic interrupt response, low power, low area, ease of development, and 32-bit perfor... » read more

A Security Foundation For Billions Of Devices
By Thomas Ensergueix - 27 Oct, 2016 - Comments: 0

October 19, 2004 was a date like any other, and will probably not mean much to most people. However, if you are part of the Embedded community, that precise date was transformational for the microcontroller (MCU) industry. It was the day that ARM announced the first Cortex-M processor, bringing the advantages of a common architecture to the microcontroller market. Embedded developers quickly... » read more

Massively Parallel Electrically Aware Design
By Cadence - 26 Oct, 2016 - Comments: 0

In-design verification is opening new opportunities to shorten design cycles and maximize circuit performance. Whereas physical verification has traditionally required a tradeoff between accuracy and performance for larger designs, recent advances in large-scale distributed computing may offer an alternative. Cloud infrastructure needs are pushing the industry toward larger multi-core server ar... » read more

What Is Fuzzing?
By Synopsys - 26 Oct, 2016 - Comments: 0

Fuzzing is an excellent technique for locating vulnerabilities in software. The basic premise is to deliver intentionally malformed input to target software and detect failure. A complete fuzzer has three components. A poet creates the malformed inputs or test cases.A courier delivers test cases to the target software. Finally, an oracle detects target failures. Different fuzzing techniques ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy