中文 English
Home
TECHNICAL PAPERS

Dual Surface Architectonics for Directed Self‐Assembly of Ultrahigh‐Resolution Electronics

Using directed self-assembly method to print smaller features for printed electronics.

popularity

Abstract:
“The directed self‐assembly of electronic circuits using functional metallic inks has attracted intensive attention because of its high compatibility with extensive applications ranging from soft printed circuits to wearable devices. However, the typical resolution of conventional self‐assembly technologies is not sufficient for practical applications in the rapidly evolving additively manufactured electronics (AMEs) market. Herein, an ultrahigh‐resolution self‐assembly strategy is reported based on a dual‐surface‐architectonics (DSA) process. Inspired by the Tokay gecko, the approach is to endow submicrometer‐scale surface regions with strong adhesion force toward metallic inks via a series of photoirradiation and chemical polarization treatments. The prepared DSA surface enables the directed self‐assembly of electronic circuits with unprecedented 600 nm resolution, suppresses the coffee‐ring effect, and results in a reliable conductivity of 14.1 ± 0.6 µΩ cm. Furthermore, the DSA process enables the layer‐by‐layer fabrication of fully printed organic thin‐film transistors with a short channel length of 1 µm, which results in a large on–off ratio of 10⁶ and a high field‐effect mobility of 0.5 cm² V⁻¹ s⁻¹.”

Find the technical paper link here and summary here.

Lingying, Li & Li, Wanli & Sun, Qingqing & Liu, Xuying & Jiu, Jinting & Tenjimbayashi, Mizuki & Kanehara, Masayuki & Nakayama, Tomonobu & Minari, Takeo. (2021). Dual Surface Architectonics for Directed Self‐Assembly of Ultrahigh‐Resolution Electronics. Small. 17. 2101754. 10.1002/smll.202101754.


Tags:

Leave a Reply


(Note: This name will be displayed publicly)