Mark LaPedus

  (all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Inside Inspection And Metrology
By Mark LaPedus - 18 Dec, 2015 - Comments: 0

Semiconductor Engineering sat down to talk about inspection, metrology and other issues with Mehdi Vaez-Iravani, vice president of advanced imaging technologies at Applied Materials. What follows are excerpts of that conversation. SE: Today, the industry is working on a new range of complex architectures, such as 3D NAND and finFETs. For these technologies, the industry is clearly struggling... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 18 Dec, 2015 - Comments: 1

Samsung plans to make a major entry into the drone market, according to reports. “Samsung is not alone in focusing on the drone market,” said Will Strauss, president of Forward Concepts, in a research note. “At CES next month in Las Vegas, one can expect new products from drone market leader DJI, but dozens of new drone models from Parrot and many other companies. Even GoPro chip maker A... » read more

Fab Tool Biz Looks Cloudy
By Mark LaPedus - 17 Dec, 2015 - Comments: 1

Amid a slowdown in the foundry and DRAM sectors, the outlook for the semiconductor equipment industry looks somewhat cloudy, if not challenging, in 2016. In fact, for equipment vendors, 2016 could resemble the lackluster year in 2015. In 2015, for example, capital spending in the foundry sector fell during the year, although NAND flash began to pick up steam. In 2015, though, the big stor... » read more

What’s Next In Mobile Displays
By Mark LaPedus - 17 Dec, 2015 - Comments: 0

The next wave of smartphones and wearables is invading the market. These systems will feature a new class of high-resolution displays, and in the near future displays will become foldable and rollable, although there are still some challenges with this technology. To be sure, mobile display technology is advancing on several fronts. On one front, for example, Apple and other systems vendor... » read more

Foundries Face Challenges in 2016
By Mark LaPedus - 17 Dec, 2015 - Comments: 2

Generally, 2015 has been a challenging year in the foundry business. For one thing, the foundry industry will register modest growth in 2015. In addition, the foundry customer base is consolidating. And on the leading edge, foundries took longer than expected to ramp up their 16nm/14nm finFET processes. So, after an eventful year in 2015, what’s in store for the foundry business in 2016? I... » read more

Inside The SRC
By Mark LaPedus - 17 Dec, 2015 - Comments: 0

Semiconductor Engineering sat down to talk with Ken Hansen, the new president and chief executive of the Semiconductor Research Corp. (SRC), a U.S.-based technology research consortium. Prior to joining the SRC in May, Hansen was vice president and chief technology officer at Freescale. What follows are excerpts of that conversation. SE: My impression is that the SRC allocates funding for va... » read more

Manufacturing Bits: Dec. 15
By Mark LaPedus - 15 Dec, 2015 - Comments: 0

DRAM scaling sans EUV At the recent IEEE International Electron Devices Meeting (IEDM) in Washington, D.C., chipmakers presented papers on several technologies, including one unlikely topic—DRAM scaling. For years, it was believed that DRAMs would hit the wall and stop scaling at 20nm or so. Then, at that point, the industry would need to migrate to a 3D DRAM structure or a next-generatio... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 11 Dec, 2015 - Comments: 0

In 2015, Korea outspent all other countries ($9 billion) on front-end semiconductor fab equipment, according to SEMI. But Korea is expected to drop to second place in 2016, as Taiwan takes over with the largest CapEx spending at $8.3 billion, according to SEMI. In 2015, Americas ranked third in overall regional CapEx spending with about $5.6 billion and is forecast to increase only slightly to ... » read more

Manufacturing Bits: Dec. 8
By Mark LaPedus - 08 Dec, 2015 - Comments: 0

Quantum computing At this week’s IEEE International Electron Devices Meeting (IEDM) in Washington, D.C., chipmakers, research institutes and universities presented a plethora of papers on several subjects. A large number of papers revolve around the same theme—How to extend Moore’s Law. For this, researchers are working on a number of short- and long-term technologies to propel device... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 04 Dec, 2015 - Comments: 2

For years, China has been trying to get a domestic IC equipment industry off the ground, but it has experienced modest success in the arena. Now, China may take a new strategy—acquire fab tool makers. In what could be a sign of things to come, China’s Beijing E-Town Dragon Semiconductor Industry Investment Center has entered into a definitive agreement to acquire U.S.-based fab tool vendor ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy