Mark LaPedus

  (all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Avogy: Vertical GaN Power Devices
By Mark LaPedus - 02 Feb, 2015 - Comments: 0

Gallium nitride (GaN), a binary III-V bandgap material, has been used to make LEDs for the last several years. GaN has also been touted as the next big thing in power electronics and RF. To some degree, GaN has made inroads in RF, especially in high-end defense and aerospace applications. But the technology is having mixed success in power electronics. Today’s GaN-on-silicon devices are l... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 30 Jan, 2015 - Comments: 0

This week, IBM began to cut jobs amid lackluster results. Big Blue is also in the process of selling its chip unit to GlobalFoundries. GlobalFoundries said the jobs are safe at IBM Micro, at least for now, according to a report the Press and Sun-Bulletin. What’s the latest with Applied Materials’ proposed acquisition with Tokyo Electron Ltd. (TEL)? “Germany, Israel and Singapore approv... » read more

Manufacturing Bits: Jan. 27
By Mark LaPedus - 27 Jan, 2015 - Comments: 0

Calibration systems go portable The National Institute of Standards and Technology (NIST) is selling a new portable, vacuum-based calibration unit for use in instruments and other systems. The system, dubbed the Portable Vacuum Standard (PVS), is a compact unit that enables precise calibrations and measurements at a customer’s facility. Housed in the white “igloo” enclosure, the syste... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 23 Jan, 2015 - Comments: 0

The profile of a "tech geek" is typically a male. The label itself has transitioned from a negative to a positive connotation, according to new data from Crucial.com. In fact, almost half of women (45%) identified tech entrepreneurs as the most desirable potential spouse, compared to only 5% of women who would prefer a football player for a spouse. More than one in three women want a significan... » read more

Tech Talk: Photomask Challenges
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

GlobalFoundries' Bob Pack talks with Semiconductor Engineering about new problems experienced by photomask shops and how does lithography affects it all. [youtube vid=8hJwVhaZhFc] » read more

Next Channel Materials?
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Chipmakers are making a giant leap from planar transistors to [getkc id="185" kc_name="finFETs"]. Initially, [getentity id="22846" e_name="Intel"] moved into finFET production at 22nm and is now ramping up its second-generation finFETs at 14nm. And the other foundries will enter the finFET fray at 16nm/14nm. So what’s next? Chipmakers will likely extend the finFET architecture to both 10nm... » read more

One-On-One: Aaron Thean
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Aaron Thean, vice president of process technologies and director of the logic devices R&D program at Imec. SE: Chipmakers are ramping up the 16nm/14nm logic node, with 10nm and 7nm in R&D. What’s the current timeline for 10nm and 7nm? Thean: 10nm is on its way. We will see r... » read more

Fab Tool R&D And Ramen Noodles
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

The semiconductor equipment and materials industry has always been a tough business. Over the years, vendors have been under pressure to develop new technologies for a shrinking but demanding customer base. And as a result, many vendors could not keep up, or elected to exit the business, causing a massive shakeout in the industry. It isn’t getting any easier, though. Today, tool and... » read more

Searching For The Next Power Transistor
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

For decades, the industry has relied on various power semiconductors to control and convert electrical power in an efficient manner. Power semis are ubiquitous, as they are found in adapters, appliances, cars, elevators, switching power supplies, power grids and other systems. But today’s silicon-based power semiconductor transistor technologies, such as IGBTs, MOSFETs and thyristors, are ... » read more

Manufacturing Bits: Jan. 20
By Mark LaPedus - 20 Jan, 2015 - Comments: 0

Batman chips The demand for faster and higher-density storage has prompted researchers to look for ways to control the magnetic states of tiny magnets. Seeking to improve the magnetic recording speeds and spatial resolutions in structures, Radboud University and others attempted to switch the magnetization in microstructures by using a femtosecond laser pulse. The laser light did not switch... » read more

← Older posts Newer posts →

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy