Mark LaPedus

  (all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Finding, Predicting EUV Stochastic Defects
By Mark LaPedus - 17 Jun, 2021 - Comments: 0

Several vendors are rolling out next-generation inspection systems and software that locates problematic defects in chips caused by processes in extreme ultraviolet (EUV) lithography. Each defect detection technology involves various tradeoffs. But it’s imperative to use one or more of them in the fab. Ultimately, these so-called stochastic-induced defects caused by EUV can impact the perf... » read more

Manufacturing Bits: June 15
By Mark LaPedus - 15 Jun, 2021 - Comments: 0

Next-gen RF signal processors Sandia National Laboratories has taken steps to realize the development of acoustic wave amplifiers, a technology that could one day pave the way towards long-awaited tiny RF signal processors. Researchers have developed piezoelectric acoustic devices using surface acoustic wave (SAW) technology and demonstrated the ability to manufacture these devices. Still i... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 11 Jun, 2021 - Comments: 0

Chipmakers SiFive has received a takeover offer from Intel, according to a report from Bloomberg. The asking price is more than $2 billion. ------------------------------------------------------------------ IBM has filed suit against GlobalFoundries (GF), alleging fraud and breach of contract committed by GF. IBM’s suit, filed in the Supreme Court of the state of New York, seeks relief... » read more

Manufacturing Bits: June 7
By Mark LaPedus - 07 Jun, 2021 - Comments: 0

High-voltage superjunction SiC devices The University of Warwick and Cambridge Microelectronics have presented a paper on the latest effort to develop of a new type silicon carbide (SiC) power device called a SiC superjunction Schottky diode. Researchers have simulated and optimized the development of 4H-SiC superjunction Schottky diodes at a voltage class of 1700 volts, aiming for breakdow... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 04 Jun, 2021 - Comments: 0

Government policy The Malaysian government has extended its lockdown due to the pandemic until June 14, a move that may impact the global electronics supply chain, according to TrendForce. Malaysia recently implemented MCO 3.0 (Movement Control Order), the nation’s pandemic control measure. Malaysia is home to many fab equipment, packaging and testing facilities, as well as passive compon... » read more

Manufacturing Bits: June 1
By Mark LaPedus - 01 Jun, 2021 - Comments: 0

Frozen finFETs The Defense Advanced Research Projects Agency (DARPA) has launched the Low Temperature Logic Technology (LTLT) program, an effort to develop finFETs that operate at temperatures close to liquid nitrogen (~77K or minus 321 degrees Fahrenheit). The goal of LTLT is to develop low-temperature finFET transistors at the 14nm node and below by making modifications to the manufacturi... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 28 May, 2021 - Comments: 0

Government policy The U.S. government hopes to build more fabs and expand its R&D efforts in the United States. To help enable those efforts, U.S. Senate Majority Leader Charles Schumer has introduced the new bipartisan U.S. Innovation and Competition Act. This combines Schumer’s Endless Frontier Act and other bipartisan competitiveness bills. It includes $52 billion in emergency supplem... » read more

Manufacturing Bits: May 25
By Mark LaPedus - 25 May, 2021 - Comments: 0

Higher voltage GaN Imec and Aixtron have demonstrated the ability to extend gallium-nitride (GaN) to new voltage levels in the power semiconductor market, enabling the technology to compete in much broader segments. Imec and Aixtron have demonstrated epitaxial growth of GaN buffer layers qualified for 1,200-volt applications on specialized 200mm substrates with a hard breakdown exceeding 1,... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 21 May, 2021 - Comments: 0

Packaging and test TrendForce has released its ranking of the top OSATs in terms of sales in the first quarter of 2021. ASE remains in the top spot, followed in order by Amkor, JCET, SPIL and PTI. “Industry leaders ASE and Amkor posted revenues of $1.69 billion and $1.33 billion, which are YoY increases of 24.6% and 15.0%, respectively, in 1Q21,” according to TrendForce. “ASE graduall... » read more

Flat-Panel Display Demand Soars
By Mark LaPedus - 20 May, 2021 - Comments: 0

What a difference a year makes in the flat-panel display market. Prior to the Covid-19 pandemic outbreak in early 2020, the flat-panel display (FPD) market was gloomy. Oversupply, falling prices and losses were the common themes in the market. It’s been a different story during the outbreak. In 2020, the FPD market rebounded. In the stay-at-home economy, consumers went on a buying spree... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy