Mark LaPedus

  (all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Uncertainty Grows For 5nm, 3nm
By Mark LaPedus - 19 Dec, 2016 - Comments: 4

As several chipmakers ramp up their 10nm finFET processes, with 7nm just around the corner, R&D has begun for 5nm and beyond. In fact, some are already moving full speed ahead in the arena. [getentity id="22586" comment="TSMC"] recently announced plans to build a new fab in Taiwan at a cost of $15.7 billion. The proposed fab is targeted to manufacture TSMC’s 5nm and 3nm processes, whic... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 16 Dec, 2016 - Comments: 0

Chipmakers Samsung is mulling over a plan to reorganize its System LSI division, according to a report from BusinessKorea. As part of the move, Samsung is mulling over the idea to spin off its foundry unit, according to the report. A spokeswoman for Samsung’s foundry unit said: “We don't have any comments on this story.” GlobalFoundries has added eight new partners to its FDXcelera... » read more

5 Takeaways from IEDM
By Mark LaPedus - 15 Dec, 2016 - Comments: 1

As usual, the recent IEEE International Electron Devices Meeting (IEDM) was a busy week. The event, which took place in San Francisco, featured a plethora of subjects, such as next-generation transistors and memories. The event also included tracks on non-traditional approaches like quantum and neuromorphic computing. And then, there were sessions on power semis and others. In no partic... » read more

Inside Advanced Patterning
By Mark LaPedus - 15 Dec, 2016 - Comments: 0

Prabu Raja, group vice president and general manager for the Patterning and Packaging Group at [getentity id="22817" e_name="Applied Materials"], sat down with Semiconductor Engineering to discuss the trends in patterning, selective processes and other topics. Raja is also a fellow at Applied Materials. What follows are excerpts of that conversion. SE: From your standpoint, what are the big... » read more

Fab Tool Biz Faces Challenges In 2017
By Mark LaPedus - 15 Dec, 2016 - Comments: 3

After experiencing a gradual recovery and positive growth in 2016, the semiconductor equipment industry sees a mixed picture as well as some uncertainty in 2017. In the near term, though, business is robust. Several chipmakers started to place a sizeable number of fab tool orders in the latter part of 2016, particularly in three areas—3D NAND, logic and foundry. Now, after buying the in... » read more

Manufacturing Bits: Dec. 13
By Mark LaPedus - 13 Dec, 2016 - Comments: 0

Phonon lasers A European consortium recently kicked off a new project that will develop a practical phonon laser. The European consortium, called PHENOMEN, will be coordinated by the Catalan Institute of Nanoscience and Nanotechnology (ICN2). Most chips perform functions using an electrical charge (electrons) or by light (photons). In comparison, a phonon “is a quantum of energy or a q... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 09 Dec, 2016 - Comments: 2

Chipmakers At this week’s IEEE International Electron Devices Meeting (IEDM) in San Francisco, TSMC as well as the team of GlobalFoundries, IBM and Samsung separately presented papers on 7nm finFET technology. Qualcomm has begun sampling the world’s first 10nm server processor. As the first in the Qualcomm Centriq product family, the ARM-based processor has up to 48-cores and is built ... » read more

Manufacturing Bits: Dec. 6
By Mark LaPedus - 06 Dec, 2016 - Comments: 1

The National High Magnetic Field Laboratory (MagLab) has broken an unofficial record for the world’s most powerful hybrid magnet. The 33-ton system, called the series connected hybrid (SCH) magnet, has reached its full field strength of 36 tesla. The SCH is more than 40% stronger than the previous world-record hybrid magnet. Tesla, or T, is the measurement of magnetic field strength. A ref... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 02 Dec, 2016 - Comments: 0

Manufacturing There are more changes at SEMI. SEMI has named David Anderson as president of the SEMI Americas region. Most recently, Anderson was chief executive and chairman of Novati, a specialty manufacturing fab. He replaces Karen Savala, who was president of the SEMI Americas region for six years. In an e-mail, Savala confirmed she left SEMI in October. Meanwhile, in October, SEMI an... » read more

Manufacturing Bits: Nov. 29
By Mark LaPedus - 29 Nov, 2016 - Comments: 0

Supersonic kinetic spraying Low-cost flexible electronics could enable a new class of products, such as roll-up displays, wearable electronics, flexible solar cells and electronic skin. There is a major barrier to enable these technologies, however. The problem is to make flexible transparent conducting films that are scalable and economical. The University of Illinois at Chicago and Kor... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy