Mark LaPedus

  (all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Week In Review: Manufacturing, Test
By Mark LaPedus - 26 Apr, 2019 - Comments: 0

Fab tools and test Lam Research has developed a new self-maintaining or self-cleaning chamber for its etch tools. With the technology, Lam announced a new industry benchmark has been set for productivity in etch processing using its self-maintaining equipment. Etch process modules are typically cleaned weekly or monthly. Recently, Lam and a chipmaker reached the milestone of going 365 days... » read more

Manufacturing Bits: April 23
By Mark LaPedus - 23 Apr, 2019 - Comments: 0

Sorting nuclei CERN and GSI Darmstadt have begun testing the first of two giant magnets that will serve as part of one of the largest and most complex accelerator facilities in the world. CERN, the European Organization for Nuclear Research, recently obtained two magnets from GSI. The two magnets weigh a total of 27 tons. About 60 more magnets will follow over the next five years. These ... » read more

Electric Cars Gain Traction, But Challenges Remain
By Mark LaPedus - 22 Apr, 2019 - Comments: 4

Battery-powered electric vehicles are expected to reach a milestone in terms of shipments in 2019, but the technology faces several significant hurdles to gain wider adoption in the market. Limited driving range, high costs, battery issues, and a spotty charging infrastructure are the main challenges for battery electric vehicles (BEVs). In addition, there are issues with various power semic... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 19 Apr, 2019 - Comments: 0

Chipmakers Here comes the battle between 5nm and 6nm processes at two foundry vendors—Samsung and TSMC. Meanwhile, Intel is behind and scrambling to get 10nm out the door. (Intel's 10nm is equivalent to 7nm from the foundries.) Last week, TSMC announced delivery of a complete version of its 5nm design infrastructure. TSMC’s 5nm technology is based on a finFET. This week, Samsung anno... » read more

More Rare Earth Rumblings
By Mark LaPedus - 18 Apr, 2019 - Comments: 4

It’s time to look at the market for rare earths again. Rare earths are chemical elements found in the Earth’s crust. These elements, which are critical, are used in cars, consumer electronics, computers, communications, clean energy and defense systems. So why worry about them? China produces and controls 80% of the world’s rare earths. Other nations depend on China for these materi... » read more

Lithography Options For Next-Gen Devices
By Mark LaPedus - 18 Apr, 2019 - Comments: 2

Chipmakers are ramping up extreme ultraviolet (EUV) lithography for advanced logic at 7nm and/or 5nm, but EUV isn’t the only lithographic option on the table. For some time, the industry has been working on an assortment of other next-generation lithography technologies, including a new version of EUV. Each technology is different and aimed at different applications. Some are here today, w... » read more

Inspecting IC Packages Using Die Sorters
By Mark LaPedus - 18 Apr, 2019 - Comments: 0

The shift toward more complex IC packages requires more advanced inspection systems in the production flow to capture unwanted defects in products. This includes traditional optical inspection tools in the in-line production flow, but it also now requires new die sorting equipment with advanced inspection capabilities. Die sorters are not the kind of equipment that typically attracts attenti... » read more

Manufacturing Bits: April 16
By Mark LaPedus - 16 Apr, 2019 - Comments: 0

Water that won’t freeze ETH Zurich and the University of Zurich have developed water that doesn’t freeze at cold temperatures. Using various molecules with water, researchers have been able to cool the substance down to minus 263 degrees Celsius. Even then, there were no ice crystals formed in the substance. This technology could be used to develop new biomolecules and membranes for ... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 12 Apr, 2019 - Comments: 0

Fab tools ASML said it has disagreed with any implication that it has been a victim of “Chinese espionage,” as stated in an article in a Dutch newspaper. The article discusses the results of a public court case in the United States that ASML won last year. In the case, XTAL was found by a jury to have misappropriated ASML’s confidential and proprietary information as well as trade secret... » read more

3D NAND Metrology Challenges Growing
By Mark LaPedus - 09 Apr, 2019 - Comments: 8

3D NAND vendors face several challenges to scale their devices to the next level, but one manufacturing technology stands out as much more difficult at each turn—metrology. Metrology, the art of measuring and characterizing structures, is used to pinpoint problems and ensure yields for all chip types. In the case of 3D NAND, the metrology tools are becoming more expensive at each iteration... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy