Blog Review: Aug. 21

By Jesse Allen - 21 Aug, 2024 - Comments: 0

Cadence's Reela Samuel explores the critical role of PCIe 6.0 equalization in maintaining signal integrity and solutions to mitigate verification challenges, such as creating checkers to verify all symbols of TS0, ensuring the correct functioning of scrambling, and monitoring phase and LTSSM state transitions. Siemens' John McMillan introduces an advanced packaging flow for Intel's Embedded ... » read more

Manufacturing Bits: Aug. 2

By Mark LaPedus - 02 Aug, 2016 - Comments: 0

CMP replacement? For years, chipmakers have used chemical-mechanical-polishing (CMP) tools to smooth or polish the surface of a wafer. CMP works, but the technology is time-consuming and expensive. CMP can also leave unwanted residual patterns and defects near the surface. In response, Russia’s National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) has help... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 10 Jun, 2016 - Comments: 0

MEMS manufacturing A*STAR’s Institute of Microelectronics (IME) in Singapore has launched its third consortium to develop MEMS technologies. This would allow MEMS sensor devices to achieve better performance, higher power efficiency and a smaller form factor. The MEMS Consortium III consists of the following companies: Applied Materials, Coventor, Delta Electronics, GlobalFoundries, InvenS... » read more

Ion Implanter Market Heats Up

By Mark LaPedus - 14 Aug, 2014 - Comments: 0

The ion implanter market has been a stable, if not a sleepy, business. The last big event took place in 2011, when Applied Materials re-entered the ion implanter market by acquiring Varian, the world’s leading supplier of these tools. The acquisition gave Applied Materials a commanding 80% share of the implanter business, with the other players fighting for the crumbs. But after year... » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: Ulvac

Blog Review: Aug. 21

Manufacturing Bits: Aug. 2

The Week In Review: Manufacturing

Ion Implanter Market Heats Up