Startup Funding: June 2023

By Jesse Allen - 10 Jul, 2023 - Comments: 0

June saw several large funding rounds, with seven of at least $100 million. Over half a billion dollars alone went to a Chinese company manufacturing silicon carbide (SiC) power semiconductors. The wide band gap material has seen steady interest from investors, particularly for its potential use in electric vehicles. Another of the month's mega-rounds went to a company designing RISC-V SoCs ... » read more

Startup Funding: April 2023

By Jesse Allen - 03 May, 2023 - Comments: 0

Packaging was a hot spot in April, with one of the largest rounds going to a middle-end-of-line advanced packaging company. A second packaging company also drew significant funding for its focus on wafer-level packaging for CMOS image sensors. Two packaging substrate manufacturers also saw investment. Two photoresist makers also drew sizeable rounds. Both they and the packaging companies are... » read more

Startup Funding: December 2022

By Jesse Allen - 04 Jan, 2023 - Comments: 0

The month of December saw six rounds of $100 million or more. The largest, at a massive half-billion dollars, will support manufacturing of 12-inch monocrystalline silicon polished wafers and epitaxial wafers in China. The company is aiming for a production rate of 1 million pieces a month when current expansion is completed. Also in the half-billion club last month is a company making auton... » read more

Startup Funding: October 2022

By Jesse Allen - 02 Nov, 2022 - Comments: 1

Investors poured $3.5 billion into 113 startup companies in October 2022, especially new battery technology, AI hardware, and faster memory access. Battery technology dominated the fundraising in October thanks to the U.S. Department of Energy and four funding rounds that exceeded $200M. The DOE awarded sizeable grants to help 20 companies, including six startups, build out battery material ... » read more

Startup Funding: September 2022

By Jesse Allen - 05 Oct, 2022 - Comments: 0

The onshoring and buildout of dozens of fabs, many costing tens of billions of dollars, is beginning to spill over into other areas that are critical for chip manufacturing. Materials, in particular, which often gets little attention outside of chip manufacturing, witnessed a big spike in September 2022. In fact, seven materials companies covered in this report made up more than a third of the ... » read more

Startup Funding: June 2022

By Jesse Allen - 06 Jul, 2022 - Comments: 0

Big money went to manufacturing in June, with a massive round for a Chinese analog foundry’s expansion to 55 – 40nm nodes. A fab management software startup also drew sizeable investment, as did a supplier of semiconductor-grade silicon components. Investors didn’t forget chip design, with three EDA companies receiving new funding, one of which drew over $100 million. Plus, numerous te... » read more

Startup Funding: March 2022

By Jesse Allen - 04 Apr, 2022 - Comments: 0

Semiconductor manufacturing, test, and inspection equipment startups did well in March. Investors funded a wide variety of equipment companies, including test equipment, materials handling, and those that make parts and components. In the manufacturing space, several companies developing manufacturing execution systems received funding, as well as a startup trying to prevent counterfeit parts f... » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.