Mark LaPedus

  (all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Five Disruptive Test Technologies
By Mark LaPedus - 19 Jun, 2014 - Comments: 0

For years, test has been a critical part of the IC manufacturing flow. Chipmakers, OSATs and the test houses buy the latest testers and design-for-test (DFT) software tools in the market and for good reason. A plethora of unwanted field returns is not acceptable in today’s market. The next wave of complex chips may require more test coverage and test times. That could translate into higher... » read more

Mobile Packaging Market Heats Up
By Mark LaPedus - 19 Jun, 2014 - Comments: 0

Apple, Samsung and others are developing the next wave of smartphones and tablets. OEMs want to cram more chip functions in smaller IC packages, but there are some challenges in the arena. In fact, there are signs that the mainstream packaging technology for mobiles is running out of steam. For some time, mobile products have incorporated a technology called package-on-package (PoP), which u... » read more

Will 7nm And 5nm Really Happen?
By Mark LaPedus - 19 Jun, 2014 - Comments: 11

As leading-edge chipmakers continue to ramp up their 28nm and 20nm devices, vendors are also updating their future technology roadmaps. In fact, IC makers are talking about their new shipment schedules for 10nm. And GlobalFoundries, Intel, Samsung and TSMC are narrowing down the options for 7nm, 5nm and beyond. There is a high probability that IC makers can scale to 10nm, but vendors face a ... » read more

Multi-beam Sees The Light
By Mark LaPedus - 19 Jun, 2014 - Comments: 2

The multiple-beam electron-beam market is going in two separate directions at once. Multi-beam for photomask writing is set to take off. The other market--multi-beam for direct-write lithography applications—is still in the early stages and remains in flux. In the multi-beam direct-write segment, for example, multiple sources indicate that KLA-Tencor is exiting this market to focus on its ... » read more

Has The IC Industry Hit A ‘Red Brick Wall’?
By Mark LaPedus - 19 Jun, 2014 - Comments: 2

In the mid-1980s, the semiconductor industry was in a crisis. Chipmakers were looking for ways to break the magical one-micron barrier. Many thought X-ray lithography would be required to break the barrier, but as it turned out, traditional optical technology did the trick. And the industry marched on. Then, in 2000 or so, the IC industry was nearing the so-called “red brick wall,” which... » read more

Manufacturing Bits: June 17
By Mark LaPedus - 17 Jun, 2014 - Comments: 1

PiezoFET debuts The University of Twente MESA+ Research Institute and SolMateS have put a new twist on the finFET. A piezoelectric stressor layer has been deposited around the finFET, thereby enabling what researchers call the PiezoFET. The PiezoFET could enable steep sub-threshold slope devices. In the lab, this device was also able to reduce the leakage by a factor of five. [caption id... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 13 Jun, 2014 - Comments: 0

In a much-anticipated deal, IBM is close to selling its chip unit to GlobalFoundries, according to Bloomberg. GlobalFoundries wants IBM’s engineers and the IP, and not the fabs. Intel lost its challenge against a record 1.06 billion euro ($1.44 billion) European Union fine handed down five years ago, according to Reuters. The EU said Intel tried to thwart AMD by giving rebates to PC makers... » read more

Manufacturing Bits: June 10
By Mark LaPedus - 10 Jun, 2014 - Comments: 0

At the recent ITF Brussels 2014 event in Belgium, Imec and its partners described a plethora of new technologies in several arenas. Here’s just a small sample of what Imec and others are working on: Hyperspectral imaging cameras Imec and Ximea have devised the world’s smallest hyperspectral imaging camera. Hyperspectral cameras divide the light spectrum into many small wavelength bands.... » read more

Test Challenges Grow
By Mark LaPedus - 09 Jun, 2014 - Comments: 1

Semiconductor Engineering sat down to discuss current and future test challenges with Dave Armstrong, director of business development at Advantest; Steve Pateras, product marketing director for Silicon Test Solutions at Mentor Graphics; Robert Ruiz, senior product marketing manager at Synopsys; Mike Slessor, president of FormFactor; and Dan Glotter, chief executive of Optimal+. SE: In our l... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 06 Jun, 2014 - Comments: 0

To help fab tool vendors, Imec has formally launched what it calls a “suppliers hub.” This program aims to offer an open R&D platform, which enables chip suppliers and tool makers to collaborate more deeply and in an earlier stage in the process. D2S has acquired the assets of Gauda, a developer of GPGPU-based computational lithography acceleration technology headquartered in Sunnyvale,... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy