5 Takeaways From Semicon

By Mark LaPedus - 21 Jul, 2016 - Comments: 0

As usual, the recent Semicon West trade show was a busy, if not an overwhelming, event. The event, which took place in San Francisco in early July, featured presentations on the usual subjects in the semiconductor and IC-equipment sectors. There were sessions on 200mm, next-generation processes, transistors, lithography, MEMS and many others. In no particular order, here are my five ta... » read more

200mm Equipment Shortfall

By Mark LaPedus - 21 Jul, 2016 - Comments: 0

A surge in demand for consumer electronics, communications ICs, sensors and other products has created a shortage in 200mm fab capacity that shows no signs of abating. None of these chips need to be manufactured using the most advanced processes, and there have been enough tweaks to processes at established nodes to eke even more out of existing processes. But that has left chipmakers strugg... » read more

The Trouble With MEMS

By Ed Sperling - 25 May, 2016 - Comments: 0

The advent of the Internet of Things will open up a slew of new opportunities for MEMS-based sensors, but chipmakers are proceeding cautiously. There are a number of reasons for that restraint. Microelectromechanical systems are difficult to design, manufacture and test, which initially fueled optimism in the MEMS ecosystem that this market would command the same kinds of premiums that analo... » read more

Insider’s Guide To Photomasks

By Mark LaPedus - 17 Mar, 2016 - Comments: 1

Semiconductor Engineering sat down to talk about photomasks and lithography with Franklin Kalk, executive vice president of technology at Toppan Photomasks, a merchant photomask supplier. What follows are excerpts of that conversation. SE: What’s hot in mask technology these days? Kalk: It’s everything from the bleeding-edge like EUV to much more mature manufacturing. On the mature si... » read more

Rise Of The Old Fab

By Ed Sperling - 17 Dec, 2015 - Comments: 0

Growth in the [getkc id="260" comment="Internet of Everything"], along with the beginning of a shift toward systems in package, are creating buzz in a rather unlikely place—established and well-worn process nodes where equipment is scarce, semi-functional, and difficult to maintain. In the past, moving to the next node was a sign of progress, leaving behind the trailing edge of designs to ... » read more

IoT Requires The Evolution Of The “New” 200mm Fab

By SEMI - 01 Jun, 2015 - Comments: 0

By Bill Martin & Paul Werbaneth In April, we all celebrated the 50th anniversary of Moore’s Law. While critical for the industry, sometimes “chasing-the-latest-technology” business model is not the answer. Sometimes veering away from Moore’s Law makes more sense and is a better alternative. But, ever since the 1970’s, many product developer minds were conditioned that smaller w... » read more

10nm Fab Watch

By Mark LaPedus - 21 May, 2015 - Comments: 1

When will the 10nm logic node happen? Analysts believe that foundry vendors will move into 10nm finFET volume production around 2017. Still others say the 10nm finFET ramp could take place anywhere from 2018 to 2020. The predictions are all over the map. One way to predict the timing, progress and demand for 10nm is simple: Follow the fabs. In fact, Intel, Samsung, TSMC and GlobalFound... » read more

“Make in India”

By SEMI - 19 Mar, 2015 - Comments: 0

By Bettina Weiss In recent weeks, I have been talking to SEMI members and other stakeholders about India. Some consider any semiconductor industry development in the country a dream. Others are looking more closely at current indicators of something real and tangible, trying to determine whether to get involved. The electronics sector in India will have to satisfy a huge demand growth... » read more

Manufacturing Constraint Fears Grow

By Ed Sperling - 18 Dec, 2014 - Comments: 0

The semiconductor industry could become a victim of its own success. With so many semiconductors being consumed inside of cars, home electronics and industry, capacity shortages are beginning to surface in some areas. Foundries set rates depending upon a complex mix of process technology, equipment depreciation, customer demand and the need to push customers from one node the next depending ... » read more

Navigating The Used Equipment Market

By Mark LaPedus - 18 Sep, 2014 - Comments: 0

For years, the used semiconductor equipment market has been an important but obscure part of the IC manufacturing supply chain. In fact, nearly all chipmakers have bought used tools over the years. Buying used equipment is a quick and relatively inexpensive way to fill a particular need in both 200mm and 300mm fabs. But after years of flying under the radar, the used IC equipment market is h... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: 200mm