tag: eSilicon

IP Requires System Context At 6/5/3nm
By Ann Mutschler - 01 May, 2019 - Comments: 0

Driven by each successive generation of semiconductor manufacturing technology, complexity has reached dizzying levels. Every part of the design, verification and manufacturing is more complicated and intense the more transistors are able to be packed onto a die. For these reasons, the entire system must be taken into consideration as a whole – not just as individual building blocks as could ... » read more

Focus Shifting From 2.5D To Fan-Outs For Lower Cost
By Ed Sperling - 29 Apr, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with Calvin Cheung, vice president of engineering at ASE; Walter Ng, vice president of business management at UMC; Ajay Lalwani, vice president of global manufacturing operations at eSilicon; Vic Kulkarni, vice president and chief strategist in the office of the CTO at ANSYS; and Tien Shiah, senior manager for memory at Samsung. W... » read more

Moore’s Law Now Requires Advanced Packaging
By Ed Sperling - 18 Apr, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with Calvin Cheung, vice president of engineering at ASE; Walter Ng, vice president of business management at UMC; Ajay Lalwani, vice president of global manufacturing operations at eSilicon; Vic Kulkarni, vice president and chief strategist in the office of the CTO at ANSYS; and Tien Shiah, senior manager for memory at Samsung. W... » read more

Heterogeneous Design Creating Havoc With Firmware Versions
By Ed Sperling - 01 Apr, 2019 - Comments: 0

Adding different kinds of processing elements into chips is creating system-level incompatibilities because of sometimes necessary, but usually uncoordinated, firmware updates from multiple vendors. In the past, firmware typically was synchronized with other firmware and the chip was verified and debugged. But this becomes much more difficult when multiple heterogeneous processing elements a... » read more

High-Speed Communications: On The Road Again
By Mike Gianfagna - 28 Mar, 2019 - Comments: 0

Lately, we’ve had quite a lot of trade show participation. I discussed ISSCC last month. I will be careful right now to state that ISSCC is a technical conference and not a trade show. The organizers are quite particular about that. Nonetheless, we were invited to demonstrate our high-speed SerDes there, and we got a lot of great questions from a lot of very smart people. Since ISSCC, we�... » read more

Using Less Power At The Same Node
By Brian Bailey - 14 Mar, 2019 - Comments: 0

Going to the next node has been the most effective way to reduce power, but that is no longer true or desirable for a growing percentage of the semiconductor industry. So the big question now is how to reduce power while maintaining the same node size. After understanding how the power is used, both chip designers and fabs have techniques available to reduce power consumption. Fabs are makin... » read more

Domain Expertise Becoming Essential For Analytics
By Ed Sperling - 12 Mar, 2019 - Comments: 0

Sensors are being added into everything, from end devices to the equipment used to make those sensors, but the data being generated has limited or no value unless it's accompanied by domain expertise. There are two main problems. One is how and where to process the vast amount of data being generated. Chip and system architectures are being revamped to pre-process more of that data closer to... » read more

The Other Side Of Makimoto’s Wave
By Ann Mutschler - 06 Mar, 2019 - Comments: 0

Custom hardware is undergoing a huge resurgence across a variety of new applications, pushing the semiconductor industry to the other side of Makimoto's Wave. Tsugio Makimoto, the technologist who identified the chip industry’s 10-year cyclical swings between standardization and customization, predicted there always will be room in ASICs for general-purpose processors. But it's becoming mo... » read more

New Design Approaches At 7/5nm
By Ed Sperling - 04 Mar, 2019 - Comments: 0

The race to build chips with a multitude of different processing elements and memories is making it more difficult to design, verify and test these devices, particularly when AI and leading-edge manufacturing processes are involved. There are two fundamental problems. First, there are much tighter tolerances for all of the components in those designs due to proximity effects. Second, as a re... » read more

New Memory Options
By Ed Sperling - 28 Feb, 2019 - Comments: 0

Carlos Macián, eSilicon’s senior director of AI strategy and products, talks about how to utilize memory differently and reduce the movement of data in AI chips, and what impact that has on power and performance. https://youtu.be/wItp6wReVts » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy