The Week In Review: IoT

By Jeff Dorsch - 23 Jun, 2017 - Comments: 0

Finance Samsara, an Industrial Internet of Things startup, raised $40 million in its Series C financing, led by General Catalyst. Andreesen Horowitz, an existing investor, and Samsara’s founders also participated in the funding round, which values the company at $530 million. The supplier of Internet-connected sensors for industrial and transportation applications has raised a total of $80 m... » read more

Flexible Sensors Begin Ramping

By Jeff Dorsch - 07 Apr, 2016 - Comments: 0

Sensors are at the heart of the [getkc id="76" comment="Internet of Things"]. Flexible sensors promise to extend the Internet of Everything to the battlefield, the gymnasium, the hospital, and many other places. Flexible [getkc id="187" kc_name="sensors"] represent the forefront of a sea of change in electronics, marking the transition from rigid semiconductors made with silicon and other ha... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 09 Oct, 2015 - Comments: 0

Is the sky falling in the IC equipment market? Not yet, but watch out below. Semi capital spending is expected to reach $60.37 billion in 2015, down 1% from 2014, according to Pacific Crest Securities. “Although we trimmed 2016 capex three weeks ago, we are trimming some more. We now see semiconductor capex down 4% in 2016. However, we do not see capex falling off a cliff in 2016 (i.e., down ... » read more

Manufacturing Bits: Sept. 8

By Mark LaPedus - 08 Sep, 2015 - Comments: 0

World’s pressure record The University of Bayreuth and the Deutsches Elektronen-Synchrotron (DESY) have set another world’s record for the highest static pressure ever achieved in a lab. Researchers were able to demonstrate metal osmium at pressures of up to 770 Gigapascals (GPa). Osmium is one of the world’s most incompressible metals. The 770 GPa figure is about 130 GPa higher than ... » read more

What Comes Next?

By SEMI - 27 Jun, 2014 - Comments: 0

The latest manufacturing, materials and production developments for emerging and adjacent markets will be featured at SEMICON West 2014 (www.semiconwest.org), to be held on July 8-10 at the Moscone Center in San Francisco, Calif. The co-location of emerging and adjacent market focused exhibitors and technical presentations within the framework of SEMICON West maximizes the synergies between sem... » read more

Knowledge Centers
Entities, people and technologies explored

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

Legacy Process Nodes Going Strong

The critical, and growing, significance of mature node chips and processes.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: FlexTech Alliance

The Week In Review: IoT

Flexible Sensors Begin Ramping

The Week In Review: Manufacturing

Manufacturing Bits: Sept. 8

What Comes Next?

Trending Articles

Hybrid Bonding Makes Strides Toward Manufacturability

Americas Chip Funding Energizes Industry

Advanced Packaging Driving New Collaboration Across Supply Chain

Chiplets Make Progress Using Interconnects As Glue

2D Semiconductors Make Progress, But So Does Silicon

Knowledge Centers
Entities, people and technologies explored