10nm Versus 7nm

By Mark LaPedus - 25 Apr, 2016 - Comments: 20

The silicon foundry business is heating up, as vendors continue to ramp their 16nm/14nm finFET processes. At the same time, they are racing each other to ship the next technologies on the roadmap—10nm and 7nm. But the landscape is complicated, with each vendor taking a different strategy. [getentity id="22865" e_name="Samsung"], for one, plans to ship its 10nm [getkc id="185" kc_name="fi... » read more

The Future Of MEMS Sensor Design And Manufacturing

By Stephen Breit - 21 Apr, 2016 - Comments: 0

I recently gave an invited talk at the IEEE Inertial Sensors 2016 symposium that discussed the future of commodity MEMS inertial sensor design and manufacturing. Inertial sensors comprise one of the fastest growing and most successful segments of the MEMS market. There are three industry trends that I believe will have major implications for motion sensor design and manufacturing and, more g... » read more

Inside The OSAT Business

By Mark LaPedus - 17 Mar, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss the IC-packaging industry, foundries, China and other topics with Tien Wu, chief operating officer at Taiwan's Advanced Semiconductor Engineering (ASE), the world's largest outsourced semiconductor assembly and test (OSAT) vendor. What follows are excerpts of that conversation. SE: What is your overall outlook for 2016? Wu: Last year, the semi... » read more

Mobile Market Dynamics Are Changing

By Ed Sperling - 17 Dec, 2015 - Comments: 1

Ever since the introduction of the iPhone in June 2007, increasingly advanced SoCs have dominated the semiconductor supply chain, from tools to design houses to foundries. Android's introduction in 2010 only cemented the market. Together they created massive demand for power-efficient chips that were dark most of the time, feature-rich, and which could respond within milliseconds to any command... » read more

Foundries Face Challenges in 2016

By Mark LaPedus - 17 Dec, 2015 - Comments: 2

Generally, 2015 has been a challenging year in the foundry business. For one thing, the foundry industry will register modest growth in 2015. In addition, the foundry customer base is consolidating. And on the leading edge, foundries took longer than expected to ramp up their 16nm/14nm finFET processes. So, after an eventful year in 2015, what’s in store for the foundry business in 2016? I... » read more

Packaging Wars Ahead

By Ed Sperling - 19 Nov, 2015 - Comments: 0

There has been much talk about semiconductor industry consolidation, but the shift into advanced packaging could have more far-reaching effects than all the mega-deals so far. Packaging is big business. Yole Développement has pinned the market at $30 billion, but that's only a thin slice of the pie that's in play. Companies that win the packaging deals also have a good shot of winning the m... » read more

The Silicon Foundry Market Is Alive And Well

By Rich Wawrzyniak - 19 Nov, 2015 - Comments: 0

I attended the ARM TechCon conference in Santa Clara last week and met with the GlobalFoundries team to discuss their new 14nm finFET technology. GlobalFoundries’ 14LPP technology offering was qualified in the third quarter of 2015 and is on track for volume production in 2016. FX-14 design kits are available to customers now. This announcement was the culmination of an extensive body of... » read more

Capex Growing To A Record High In 2015

By Adrienne Downey - 18 Jun, 2015 - Comments: 0

Semiconductor companies are spending more than ever to stay competitive. In 2015, the total amount spent for capital expenditures is forecast to be $68.7 billion, up 9% from 2014’s $63.3 billion. This breaks the previous record set in 2011 at $63.8 billion, as shown in the following graph. Total Semiconductor Capital Expenditures, 2009-2015 Source: Semico Research Corp. The Top 15 A... » read more

IP Integration Challenges Increase

By Ed Sperling - 16 Jun, 2015 - Comments: 0

Semiconductor Engineering sat down with Chris Rowen, CTO of [getentity id="22032" e_name="Cadence"]'s IP group; Rob Aitken, an [getentity id="22186" comment="ARM"] fellow; Patrick Soheili, vice president of product management and corporate development at [getentity id="22242" e_name="eSilicon"]; Navraj Nandra, senior director of marketing for DesignWare analog and mixed-signal IP at [getentity ... » read more

Fab Capacity Shortages

By Ed Sperling - 19 Mar, 2015 - Comments: 0

Planning fab capacity is a little like parachuting out of an airplane. Your chances of getting hurt are 50-50 every time you jump, and past experience doesn't necessarily make it safer the next time. At the leading edge, there is debate about just how much capacity should be added at 16/14nm, or whether the lion's share of that investment should go to 10nm or even 7nm. At least part of the d... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: foundries