tag: Lam

Manufacturing Bits: July 15
By Mark LaPedus - 15 Jul, 2014 - Comments: 0

Multi-beam hits milestone Mapper Lithography has reached a major milestone in its ongoing push to bring multi-beam, direct-write lithography into the mainstream. The Dutch-based company recently installed its initial pre-production tool at CEA-Leti, a French-based R&D organization. The tool, dubbed Matrix 1.1, is a multi-beam, e-beam system for direct-write applications. During the r... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 11 Jul, 2014 - Comments: 0

As feature sizes continue to shrink and new device architectures are introduced, the IC industry will require new breakthroughs. In fact, feature dimensions will soon have tolerances that are on the order of a few atoms. For the most advanced structures, conventional plasma etch and deposition processes are unable to meet these requirements. As a result, the industry will require tools th... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 03 Jul, 2014 - Comments: 0

Looking to address a new wave of chip architectures in the marketplace, Applied Materials has rolled out its next-generation, medium-current ion implanter. The system, dubbed the VIISta 900 3D, is geared for the production of finFETs and 3D NAND designs at the sub-2xnm nodes. Typically, medium-current implanters have a maximum energy range of about 900keV (triple-charge), with dose ranges fr... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 27 Jun, 2014 - Comments: 0

As semiconductor technology becomes more challenging, expect more mergers and acquisitions in the fab tool sector. In a research report issued this week, Weston Twigg, an analyst with Pacific Crest Securities, sees several possible M&A scenarios in the future. There is no evidence that any deal is pending right now. But according to Twigg, here are some possible M&As that could happen i... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 13 Jun, 2014 - Comments: 0

In a much-anticipated deal, IBM is close to selling its chip unit to GlobalFoundries, according to Bloomberg. GlobalFoundries wants IBM’s engineers and the IP, and not the fabs. Intel lost its challenge against a record 1.06 billion euro ($1.44 billion) European Union fine handed down five years ago, according to Reuters. The EU said Intel tried to thwart AMD by giving rebates to PC makers... » read more

Imec Launches R&D Tool Hub
By Mark LaPedus - 04 Jun, 2014 - Comments: 1

The semiconductor industry is entering yet another inflection point. Consumers want faster mobile systems with more functions. So, chipmakers are under pressure to deliver new and low-power chips that are smaller and faster. The problem is that IC design and chip manufacturing costs continue to escalate. These costs, in turn, are fueling an ongoing shakeout in the chip and fab tool industrie... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 23 May, 2014 - Comments: 1

About 150 to 200 employees from IBM’s chip unit will be dispatched to work at GlobalFoundries, according to the Poughkeepsie Journal. GlobalFoundries said the arrangement is temporary, according to the report. GlobalFoundries is the leading candidate to buy IBM’s chip unit, which is apparently on the block. To date, however, GlobalFoundries and IBM have yet to make any announcements on the... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 02 May, 2014 - Comments: 0

Intel has submitted a business plan to upgrade its fab in Israel, according to reports. Crocus Nano Electronics (CNE), the joint venture founded in 2011 by Crocus Technology and Russia’s RUSNANO, has raised $60 million from its investors. The venture is Russia’s first 300mm fab. This first production line was completed one year after construction began. Currently, 200mm and 300mm CMOS wa... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 25 Apr, 2014 - Comments: 0

Worldwide semiconductor capital equipment spending is projected to total $37.5 billion in 2014, an increase of 12.2% from 2013 spending of $33.5 billion, according to Gartner. Capital spending will increase 5.5% in 2014 as the industry begins to recover from the recent economic downturn. The 3D NAND market will take longer to develop. Samsung has shipped a 3D NAND device. Micron and SK Hynix... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 11 Apr, 2014 - Comments: 0

Don't look now, but the fab tool market is slowing. "After recent meetings in the supply chain plus examining comments from the largest spenders, we conclude that wafer fab equipment (WFE) could disappoint this year. We calculate approximately $30 billion to $31 billion in WFE spending in 2014, flattish from 2013, compared to expectations of $32 billion to $33 billion, which would be up 10%+. T... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy