FinFET Metrology Challenges Grow

By Mark LaPedus - 17 May, 2018 - Comments: 1

Chipmakers face a multitude of challenges in the fab at 10nm/7nm and beyond, but one technology that is typically under the radar is becoming especially difficult—metrology. Metrology, the art of measuring and characterizing structures, is used to pinpoint problems in devices and processes. It helps to ensure yields in both the lab and fab. At 28nm and above, metrology is a straightforward... » read more

Measuring FinFETs Will Get Harder

By Mark LaPedus - 19 Nov, 2015 - Comments: 2

The industry is gradually migrating toward chips based on finFET transistors at 16nm/14nm and beyond, but manufacturing those finFETs is proving to be a daunting challenge in the fab. Patterning is the most difficult process for finFETs. But another process, metrology, is fast becoming one of the biggest challenges for the next-generation transistor technology. In fact, [getkc id="252" kc_n... » read more

Searching For 3D Metrology

By Mark LaPedus - 19 Mar, 2015 - Comments: 3

In the previous decade, chipmakers made a bold but necessary decision to select the [getkc id="185" kc_name="finFET"] as the next transistor architecture for the IC industry. Over time, though, chipmakers discovered that the finFET would present some challenges in the fab. Deposition, etch and lithography were the obvious hurdles, but chipmakers also saw a big gap in metrology. In fact,... » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: LEXES

FinFET Metrology Challenges Grow

Measuring FinFETs Will Get Harder

Searching For 3D Metrology