tag: Tokyo Electron

BEOL Issues At 10nm And 7nm (Part 1)
By Ed Sperling - 15 Dec, 2016 - Comments: 5

Semiconductor Engineering sat down to discuss problems with the back end of line at leading-edge nodes with Craig Child, senior manager and deputy director for [getentity id="22819" e_name="GlobalFoundries'"] advanced technology development integration unit; Paul Besser, senior technology director at [getentity id="22820" comment="Lam Research"]; David Fried, CTO at [getentity id="22210" e_name... » read more

BEOL Barricades Ahead
By David Fried - 15 Dec, 2016 - Comments: 0

Coventor recently assembled an expert panel at IEDM 2016, to discuss changes to BEOL process technology that would be needed to continue dimensional scaling to 7 nm and lower. Among the questions posed to panelists: What is BEOL? Where does it begin and end? Are there fundamental limits to interconnect processes? How much longer can we continue to use current interconnect processes and ... » read more

Fab Tool Biz Faces Challenges In 2017
By Mark LaPedus - 15 Dec, 2016 - Comments: 3

After experiencing a gradual recovery and positive growth in 2016, the semiconductor equipment industry sees a mixed picture as well as some uncertainty in 2017. In the near term, though, business is robust. Several chipmakers started to place a sizeable number of fab tool orders in the latter part of 2016, particularly in three areas—3D NAND, logic and foundry. Now, after buying the in... » read more

200mm Equipment Shortfall
By Mark LaPedus - 21 Jul, 2016 - Comments: 0

A surge in demand for consumer electronics, communications ICs, sensors and other products has created a shortage in 200mm fab capacity that shows no signs of abating. None of these chips need to be manufactured using the most advanced processes, and there have been enough tweaks to processes at established nodes to eke even more out of existing processes. But that has left chipmakers strugg... » read more

Atomic Layer Etch Heats Up
By Mark LaPedus - 29 Jun, 2016 - Comments: 0

The atomic layer etch (ALE) market is starting to heat up as chipmakers push to 10nm and beyond. ALE is a promising next-generation etch technology that has been in R&D for the last several years, but until now there has been little or no need to use it. Unlike conventional etch tools, which remove materials on a continuous basis, ALE promises to selectively and precisely remove targete... » read more

Ready For Nanoimprint?
By Michael Watts - 17 Mar, 2016 - Comments: 0

Nanoimprint has been discussed, debated, and hyped since the term was first introduced in 1996. Now, a full 20 years later, it is being taken much more seriously in light of increasing photomask costs and delays in bringing alternatives to market. Nanoimprint lithography is something like a room-temperature UV cure embossing process. The structures are patterned onto a template or mold using... » read more

Can Nano-Patterning Save Moore’s Law?
By Mark LaPedus - 19 Nov, 2015 - Comments: 0

For years the academic community has explored a novel technology called selective deposition. Then, more than a year ago, Intel spearheaded an effort to bring the technology from the lab to the fab at 7nm or 5nm. Today, selective deposition is still in R&D, but it is gaining momentum in the industry. With R&D funding from Intel and others, selective deposition, sometimes called ALD-e... » read more

The Price Of Consolidation
By Ed Sperling - 24 Sep, 2015 - Comments: 0

Consolidation is causing far-reaching changes across the global semiconductor ecosystem due to the size of companies being bought and the dearth of startups to replenish those being acquired. Coupled with the rising cost and difficulty of shrinking features down to advanced process nodes—many argue that is the largest driver of consolidation—the market dynamics for who's buying IP, EDA t... » read more

ALD Market Heats Up
By Mark LaPedus - 17 Sep, 2015 - Comments: 1

Amid the shift to 3D NAND, finFETs and other device architectures, the atomic layer deposition (ALD) market is heating up on several fronts. Applied Materials, for example, recently moved to shakeup the landscape by rolling out a new, high-throughput ALD tool. Generally, [getkc id="250" kc_name="ALD"] is a process that deposits materials layer-by-layer at the atomic level, enabling thin and ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 17 Jul, 2015 - Comments: 0

Semicon West is always a busy week. Typically, there are a plethora of events going on during the week. It’s also a good week to get a pulse on the industry. The good news: Innovation is alive and well. Bad news: Intel cut its CapEx. And tool makers are in the midst of a lull right now, with a cloudy outlook projected for 2016. Some even see a dreaded downturn next year. Pacific Crest Secu... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy