CEO Outlook: 2020 Vision

By Ed Sperling - 06 Jan, 2020 - Comments: 0

The start of 2020 is looking very different than the start of 2019. Markets that looked hazy at the start of 2019, such as 5G, are suddenly very much in focus. The glut of memory chips that dragged down the overall chip industry in 2019 has subsided. And a finely tuned supply chain that took decades to develop is splintering. A survey of CEOs from across the industry points to several common... » read more

Fab Tool M&A Slowdown?

By Mark LaPedus - 18 Jun, 2015 - Comments: 0

The semiconductor industry is in the midst of a dizzying array of mergers and acquisitions. At the current pace, some 32% of all U.S. publicly traded semiconductor companies are projected to get acquired in 2015, according to FBR. But in reality, the M&A activity will slow and edge towards a 15% consolidation rate for the year, according to the firm. Still, the IC industry is bracing for... » read more

5 Issues Under The Foundry Radar

By Mark LaPedus - 16 Apr, 2015 - Comments: 0

In the foundry business, the leading-edge segment grabs most, if not all, of the headlines. Foundry vendors, of course, are ramping up 16nm/14nm finFET processes, with 10nm and 7nm in R&D. The leading-edge foundry business is sizable, but it’s not the only thing going on in the competitive arena. In fact, there are battles taking place in many other foundry segments, such as 2.5D/3D packag... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 23 May, 2014 - Comments: 1

About 150 to 200 employees from IBM’s chip unit will be dispatched to work at GlobalFoundries, according to the Poughkeepsie Journal. GlobalFoundries said the arrangement is temporary, according to the report. GlobalFoundries is the leading candidate to buy IBM’s chip unit, which is apparently on the block. To date, however, GlobalFoundries and IBM have yet to make any announcements on the... » read more

Is 450mm Dead In The Water?

By Mark LaPedus - 15 May, 2014 - Comments: 3

At one time, Intel, TSMC and Samsung were aggressively beating the 450mm drum. Chipmakers wanted, if not demanded, 450mm pilot line fabs by 2016, with high-volume manufacturing 450mm plants slated by 2018. At least for those companies, 450mm made some sense. Moving to 450mm wafers would supposedly give chipmakers a 2.25x boost in wafer area and a 30% cost reduction over 300mm substrates. But... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 25 Apr, 2014 - Comments: 0

Worldwide semiconductor capital equipment spending is projected to total $37.5 billion in 2014, an increase of 12.2% from 2013 spending of $33.5 billion, according to Gartner. Capital spending will increase 5.5% in 2014 as the industry begins to recover from the recent economic downturn. The 3D NAND market will take longer to develop. Samsung has shipped a 3D NAND device. Micron and SK Hynix... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: VLSI

CEO Outlook: 2020 Vision

Fab Tool M&A Slowdown?

5 Issues Under The Foundry Radar

The Week In Review: Manufacturing

Is 450mm Dead In The Water?

The Week In Review: Manufacturing