Simple, miniaturized, and low-profile multiple-input multiple-output (MIMO) antenna operating at 29 GHz with reduced mutual coupling between the antenna elements for futuristic 5G communication.
Abstract:
“This study presents a simple, miniaturized, and low-profile multiple-input multiple-output (MIMO) antenna operating at 29 GHz with reduced mutual coupling between the antenna elements for futuristic 5G communication. The proposed design employs two radiating elements with slits in the radiators to produce high isolation among the antenna radiators. The MIMO antenna maintains a compact structure of 11.4 × 5.3 mm2, which is the smallest size compared to previous 5G antennas. Roger’s 4350B laminate was employed as a substrate material. At 29 GHz, low mutual coupling of − 36 dB, low envelope correlation coefficient (ECC < 0.001), and high diversity gain (DG > 9.8 dB) are achieved. The proposed design is examined in terms of the S-parameters, diversity gain, radiation pattern, and envelope correlation. Compared to the straight antenna element, an improvement of − 20 dB is observed in the isolation for both the simulated and measured results.”
Find this open access technical paper here.. Published Mar. 2022.
Ahmad, A., Choi, Dy. & Ullah, S. A compact two elements MIMO antenna for 5G communication. Sci Rep 12, 3608 (2022). https://doi.org/10.1038/s41598-022-07579-5.
Visit Semiconductor Engineering’s Technical Paper repository here and discover many more chip industry academic papers.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Different interconnect standards and packaging options being readied for mass chiplet adoption.
Continued expansion in new and existing markets points to massive and sustained growth.
Experts at the Table: Designing for context, and geopolitical impacts on a global supply chain.
Funding rolls in for photonics and batteries; 88 startups raise $1.3B.
Interest in this particular ISA is expanding, but the growth of other open-source hardware is less certain.
Nanosheets are likeliest option throughout this decade, with CFETs and other exotic structures possible after that.
Hybrid bonding opens up whole new level of performance in packaging, but it’s not the only improvement.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Why this is becoming a bigger issue, and what can be done to mitigate the effects.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Disaggregation and the wind-down of Moore’s Law have changed everything.
Leave a Reply