category: Blogs – MD

category: IoT, Security & Automotive

Potential For 5G In Daily Life
By Krishnan Shrinivasan - 20 May, 2021 - Comments: 0

The excitement around the rollout of 5G technology could not be more palpable. We see this next-generation technology in news headlines and commercials, with promises to usher in the next wave of internet capabilities, speeds, and frictionless internet access. Let’s look at what 5G is and how semiconductor advancements are driving this new technology. What is 5G? 5G technology can be su... » read more

Rethinking Business As Usual
By Rosie Medina - 20 May, 2021 - Comments: 0

Few things can snap your priorities into focus like the onset of a pandemic. Our industry is known for its cyclical nature, so adapting to change is not a new concept. But dealing with the challenges posed by COVID-19 has been like nothing any of us have experienced before. QP Technologies has been fortunate to weather the pandemic well – less than 0.05% of our staff has tested positive, w... » read more

Is The Photomask Ecosystem Ready For Curvilinear ILT?
By Jan Willis - 18 May, 2021 - Comments: 0

The time it takes to write a photomask with curvilinear shapes was a major historical barrier to adoption inverse lithography technology (ILT), as discussed in the second installment of our blog series on curvilinear mask shapes. After years of development, multi-beam mask writers came into production and one of their features is the ability to write curvilinear masks without a write time penal... » read more

How Extensively Will Curvilinear ILT Be Used For EUV Photomasks?
By Jan Willis - 29 Apr, 2021 - Comments: 0

Curvilinear shapes on photomasks lead to improved process windows, as the first installment of this blog series discussed. Our blog series continues with a video panel discussion of the benefits that curvilinear shapes have for EUV photomasks (masks) and whether curvilinear shapes will be used beyond today’s usage for hotspots. Our panellists approached the question of curvilinear ILT for ... » read more

Improving Your Understanding Of Advanced Inertial MEMS Design
By Chris Welham - 27 Apr, 2021 - Comments: 0

Micro-electrical-mechanical systems (MEMS) based inertial sensors are used measure acceleration and rotation rate. These sensors are integrated into units to measure motion, direction, acceleration or position, and can be found in a wide range of applications including smart phones, consumer electronics, medical devices, transportation systems, oil/gas exploration, military, aeronautical and sp... » read more

Latest IC Forecast: Big Demand, Shortages
By Mark LaPedus - 15 Apr, 2021 - Comments: 1

Over the last year, the semiconductor industry has seen its share of highs, lows and uncertainties. In early 2020, the business looked bright, but the IC market dropped amid the Covid-19 pandemic outbreak. Throughout 2020 different countries implemented a number of measures to mitigate the outbreak, such as stay-at-home orders and business closures. Economic turmoil and job losses soon follo... » read more

Will An Adhesion Promoter Prevent Delamination?
By Sophie Olson - 15 Apr, 2021 - Comments: 0

Power semiconductor packages are used in high temperature, high voltage environments. With the increase of electric vehicles (EVs) and hybrid electric vehicles (HEV) in the automotive market, demands on (and for) power packages have been growing. Packages for automotive applications must pass extensive testing for safety, therefore, packaging reliability is essential. As more semiconductor pack... » read more

How Do Multi-Beam Mask Writers Enable Curvilinear Shapes On Photomasks?
By Jan Willis - 15 Apr, 2021 - Comments: 0

Multi-beam mask writing was identified as one of the ways to eliminate hurdles to manufacturing curvilinear mask shapes in the last installment of this blog. Our blog series continues with an educational video explanation of why and how multi-beam writers reduce write time for curvilinear mask shapes that took place during an eBeam Initiative panel discussion with industry experts during the 20... » read more

Global Fab Equipment Spending Poised To Log Three Straight Years Of Record Highs
By Christian Dieseldorff - 15 Apr, 2021 - Comments: 0

Fueled by surging pandemic-inspired demand for electronics devices, the global semiconductor industry is on track to register a rare three consecutive years of record highs in fab equipment spending with a 16% increase in 2020 followed by forecast gains of 15.5% this year and 12% in 2022, SEMI highlighted in its quarterly World Fab Forecast report. Fabs worldwide will add about $10 billion ... » read more

Bending The Rules With Curvilinear Technology
By Jan Willis - 05 Apr, 2021 - Comments: 0

What have been the historical hurdles for curvilinear ILT? Danping Peng, director at TSMC, reflected on his early involvement in the development of ILT and the three major hurdles encountered while at Luminescent during a panel discussion with industry experts at the eBeam Initiative’s annual event during the 2021 SPIE Advanced Lithography Conference. Among the topics covered, the panel di... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy