category: Blogs – MD

category: IoT, Security & Automotive

Software Platforms Bridge The Design/Verification Gap For 5G Communications Design
By David Vye - 15 Dec, 2016 - Comments: 0

The integration of simulation technologies, system prototyping tools, and automated test equipment is critical for addressing the complexity of developing 5G wireless technology. In these cases, design teams will need to rely on a combination of simulation and prototype testing in order to ensure design robustness. Although simulation is essential to design a test bed or prototype, measurement... » read more

40nm Technology Reinvigorated
By Steve Sharp - 15 Dec, 2016 - Comments: 0

When selecting a foundry process for mobile consumer focused products, chip designers are considering the economics of the solution just as much as the technical specifications. Using the latest and greatest finFET process might get you performance headroom above your spec, but could cost significantly more than using a more established, proven process. Today’s 40nm CMOS processes have bee... » read more

BEOL Barricades Ahead
By David Fried - 15 Dec, 2016 - Comments: 0

Coventor recently assembled an expert panel at IEDM 2016, to discuss changes to BEOL process technology that would be needed to continue dimensional scaling to 7 nm and lower. Among the questions posed to panelists: What is BEOL? Where does it begin and end? Are there fundamental limits to interconnect processes? How much longer can we continue to use current interconnect processes and ... » read more

Printed Cars, Smart Stints, Personal Breathalyzers
By Joanne Itow - 21 Nov, 2016 - Comments: 0

The MEMS and sensor market continues to be a hotbed for innovation, new opportunities and, as with most new frontiers, there are also some disparate views on market dynamics and strategies. All this was evident at the 2016 MSIG Executive Congress last week in Scottsdale, Arizona. First, I’ll cover the pioneering and fun subjects. In addition to the Technology Showcase demos and member pres... » read more

Changes In China
By SEMI - 21 Nov, 2016 - Comments: 0

By Jesse Zhang, SEMI China Industry leaders gathered in Beijing at BIMS 2016 — the Beijing International Microelectronics Symposium — to discuss growth opportunities for the semiconductor industry and the mobile communications market. The 17th session of BIMS was co-sponsored by SEMI and the Chinese-American Semiconductor Professionals Association (CASPA). For 17 years, BIMS has provi... » read more

Advanced Packaging Requires Better Yield
By Ed Sperling - 17 Nov, 2016 - Comments: 1

Whether Moore's Laws truly ends, or whether the semiconductor industry reaches into the Angstrom world after 3nm—the semiconductor industry dislikes fractions—advanced packaging increasingly will dominate semiconductor designs. Apple already is on board with its iPhone 7, using TSMC's fan-out approach. And all of the major foundries and OSATs are lining up with a long list of capabilitie... » read more

Software Platforms Bridge The Design/Verification Gap For 5G Communications Design
By David Vye - 17 Nov, 2016 - Comments: 0

We are entering the third phase of information connectivity, one that will change the use of wireless technology dramatically. The first phase connected homes and businesses through wired telephony and the early internet via dial-up modems. Over the last few decades, the development of communication networks has been superseded by wireless mobile technology connecting people instead of places. ... » read more

Fill/Cut Self-Aligned Double-Patterning
By David Abercrombie - 17 Nov, 2016 - Comments: 0

By David Abercrombie, Rehab Ali, Ahmed Hamed-Fatehy, and Shetha Nolke Self-aligned double patterning (SADP) is an alternative double-patterning process to the traditional litho-etch-litho-etch (LELE) approach used in most advanced production nodes. The main difference between the two approaches is that in LELE, the layout is divided between two masks, and the second mask is aligned with resp... » read more

Human Factors In Automation Software
By Selim Nahas - 17 Nov, 2016 - Comments: 1

The semiconductor industry offers some of the most advanced manufacturing environments featuring sophisticated automation and cutting-edge process controls. A typical day in a fab revolves around the production of billions of highly complex, extremely small structures where even the tiniest variations can impact device performance. Even though these production processes are highly automated, te... » read more

Bringing Advanced Semiconductor Manufacturing Technologies To Higher Education
By Jimmy Gu - 17 Nov, 2016 - Comments: 0

Universities and other institutions of higher learning play a key role in developing our next generation of semiconductor technologies. Along with the theory of semiconductor technology, our next generation of scientists and engineers must learn about the practical methods used to design and manufacture the latest generation of semiconductor products. Recently, Coventor’s predictive, 3D proce... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy