What the Experts Think

By Sandra Liu - 20 Dec, 2017 - Comments: 0

Coventor recently sponsored an expert panel discussion at IEDM 2017 to discuss how we might advance the semiconductor industry into the next generation of technology. The panel discussed alternative methods to solve fundamental problems of technology scaling, using advances in semiconductor architectures, patterning, metrology, advanced process control, variation reduction, co-optimization and ... » read more

The Next 5 Years Of Semiconductor Technology

By Sandra Liu - 21 Nov, 2017 - Comments: 0

New, advanced semiconductor processing and architectural technologies take years to perfect and put into production. In the meantime, semiconductor customers continue to demand faster, smaller and higher functioning devices. Semiconductor manufacturers need to decide whether (and when) to jump to the next generation of devices and production technologies, weighing the risk and benefit of bringi... » read more

Reducing BEOL Parasitic Capacitance Using Air Gaps

By Michael Hargrove - 19 Oct, 2017 - Comments: 0

Reducing back-end-of-line (BEOL) interconnect parasitic capacitance remains a focus for advanced technology node development. Porous low-k dielectric materials have been used to achieve reduced capacitance, however, these materials remain fragile and prone to reliability concerns. More recently, air gap has been successfully incorporated into 14nm technology [1], and numerous schemes have been ... » read more

Using Advanced Statistical Analysis To Improve FinFET Transistor Performance

By Jimmy Gu - 21 Sep, 2017 - Comments: 0

Trial and error wafer fabrication is commonly used to study the effect of process changes in the development of FinFET and other advanced semiconductor technologies. Due to the interaction of upstream unit process parameters (such as deposition conformality, etch anisotropy, selectivity) during actual fabrication, variations based upon process changes can be highly complex. Process simulators t... » read more

Silicon Photonics: Solving Process Variation And Manufacturing Challenges

By Sandy Wen - 17 Aug, 2017 - Comments: 0

As silicon photonics manufacturing gains momentum with additional foundry and 300mm offerings, process variation issues are coming to light. Variability in silicon processing affects the waveguide shape and can result in deviation in effective indices, propagation loss, and coupling efficiency from the intended design. In this article, we will highlight process variation issues that can occur i... » read more

The Future Of MEMS Design: Making MEMS Design More Like CMOS Design

By Christine Dufour - 20 Jul, 2017 - Comments: 0

MEMS-based component suppliers want to rapidly ramp their designs into high-volume production. This demand is driving MEMS suppliers to focus on ways to more efficiently re-use established process steps, stacks or technology platforms. To meet this need, we see the emergence of standard MEMS technology and design platforms similar to those used in CMOS design. The semiconductor industry and ... » read more

CMOS Image Sensors (CIS): Past, Present & Future

By Sofiane Guissi - 15 Jun, 2017 - Comments: 6

Over the last decade, CMOS Image Sensor (CIS) technology has made impressive progress. Image sensor performance has dramatically improved over the years, and CIS technology has enjoyed great commercial success since the introduction of mobile phones using onboard cameras. Many people, including scientists and marketing specialists, predicted 15 years earlier that CMOS image sensors were going t... » read more

What Drives SADP BEOL Variability?

By Michael Hargrove - 18 May, 2017 - Comments: 0

Until EUV lithography becomes a reality, multiple patterning technologies such as triple litho-etch (LELELE), self-aligned double patterning (SADP), and self-aligned quadruple patterning (SAQP) are being used to meet the stringent patterning demands of advanced back-end-of-line (BEOL) technologies. For the 7nm technology node, patterning requirements include a metal pitch of 40nm or less. This ... » read more

Photoresist Shape In 3D

By Mustafa Akbulut - 20 Apr, 2017 - Comments: 0

Things were easy for integrators when the pattern they had on the mask ended up being the pattern they wanted on the chip. Multi-patterning schemes such as Self-Aligned Double Patterning (SADP) and Self-Aligned Quadruple Patterning (SAQP) have changed that dramatically. Now, what you have on the mask determines only a part of what you will get at the end. You will only obtain your final product... » read more

MEMS Microphones: A Bright Spot Among Commoditized Consumer Sensors

By Jun Yan - 16 Mar, 2017 - Comments: 0

MEMS microphones have emerged as a bright spot among consumer sensors, which in general are going through a rapid commoditization and profit-squeezing trend. To understand what’s driving the MEMS microphone market, consider that the Apple iPhone 7 and 7S each have 4 MEMS microphones. As reported by System Plus Consulting, the latest iPhones have “a front-facing top microphone, presumably f... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

category: Perfecting The Process

category: IoT, Security & Automotive