category: Manufacturing, Packaging and Materials

category: IoT, Security & Automotive

The Future Of MEMS Sensor Design And Manufacturing
By Stephen Breit - 21 Apr, 2016 - Comments: 0

I recently gave an invited talk at the IEEE Inertial Sensors 2016 symposium that discussed the future of commodity MEMS inertial sensor design and manufacturing. Inertial sensors comprise one of the fastest growing and most successful segments of the MEMS market. There are three industry trends that I believe will have major implications for motion sensor design and manufacturing and, more g... » read more

Insider’s Guide To Fab Technology
By Mark LaPedus - 21 Apr, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss fab technology with Matt Paggi, vice president of advanced technology development at GlobalFoundries. What follows are excerpts of that conversation. SE: What’s driving demand for semiconductors today? Paggi: You are aware of what the worldwide semiconductor revenue growth is this year. There are peaks and valleys in the worldwide semiconduc... » read more

2015: A Year In Review
By Lara Chamness - 21 Apr, 2016 - Comments: 0

Semiconductor Market Trends Semiconductor revenues were essentially flat in 2015 when compared to 2014 levels according to the World Semiconductor Trade Statistics (WSTS). The materials market mirrored the device market, while the equipment market contracted 3%. The semiconductor equipment market typically receives more attention than the materials market, however, and the materials market has... » read more

Samsung Foundry’s Business Strategy
By Kelvin Low - 21 Apr, 2016 - Comments: 0

Wow! 2016 is off to a fast start. While visiting headquarters in Korea recently, I sat down with four members of Samsung Foundry’s global leadership team to discuss several key initiatives this year. Below are key excerpts from those conversations. Samsung Foundry’s Business Strategy Q: Can you expand on some of the macro business trends affecting the fabless/foundry industry? Jong S... » read more

ECOs and Multi-Patterning: It Can Be Done
By David Abercrombie - 21 Apr, 2016 - Comments: 0

By David Abercrombie and Alex Pearson A lot has been written and discussed about how to decompose (color) layouts for advanced process nodes that require multi­patterning (MP). However, one topic that has been sorely ignored is how to efficiently make changes to designs that are already colored, or even taped out and processed. We tend to act like all designs work out the first time through... » read more

Calibre xACT Parasitic Extraction Supports Signal Integrity At Advanced Nodes
By Mentor, a Siemens Business - 21 Apr, 2016 - Comments: 0

At advanced nodes, signal integrity analysis requires precise characterization, which in turn requires an accurate extracted netlist. Models that handle new impacts on parasitic extraction at advanced nodes, including multi-patterning, finFETs, and resistance and capacitance effects, must be used. Learn how the Calibre xACT extraction tool supports these advanced foundry device models and leadi... » read more

Inside Process Technology
By Mark LaPedus - 21 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss the foundry business, memory, process technology, lithography and other topics with David Fried, chief technology officer at [getentity id="22210" e_name="Coventor"], a supplier of predictive modeling tools. What follows are excerpts of that conversation. SE: Chipmakers are ramping up 16nm/14nm finFETs today, with 10nm and 7nm finFETs just around... » read more

Manufacturing Bits: April 19
By Mark LaPedus - 19 Apr, 2016 - Comments: 0

Hot videos The University of Minnesota has recorded videos that show how heat travels through materials, a move that could give researchers insight into the behavior of atoms and other structures. It could also pave the way towards the development of more efficient materials for use in electronics and other applications. In the lab, researchers used FEI’s transmission electron microsc... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 15 Apr, 2016 - Comments: 0

Chipmakers TSMC remained the world’s largest foundry vendor with a 54.3% share in 2015, according to the rankings from Gartner. GlobalFoundries moved into the No. 2 position with 9.6% of the market. The No. 3 position went to UMC with $4.5 billion in revenue, representing 9.3% of the market, according to the firm, which said Samsung remains No. 4. SMIC, which is No. 5, is gaining ground. ... » read more

Manufacturing Bits: April 12
By Mark LaPedus - 12 Apr, 2016 - Comments: 0

Ink FETs The University of Pennsylvania has developed a new way to make chips by using nanocrystal inks. The devices, dubbed nanocrystal field-effect transistors (FETs), could be used one day to develop chips for flexible and wearable applications In the lab, researchers devised spherical nanoscale particles. These particles, which have electrical characteristics, were dispersed in a liquid... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy