New End Markets, More Demand For Complex Chips

By Ed Sperling - 16 May, 2022 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss economic conditions and how that affects chip design with Anirudh Devgan, president and CEO of Cadence; Joseph Sawicki, executive vice president of Siemens EDA; Niels Faché, vice president and general manager at Keysight; Simon Segars, advisor at Arm; and Aki Fujimura, chairman and CEO of D2S. This discussion was held in front... » read more

Preparing For 3D-ICs

By Ed Sperling - 16 Feb, 2022 - Comments: 1

Experts at the Table: Semiconductor Engineering sat down to discuss the changes in design tools and methodologies needed for 3D-ICs, with Sooyong Kim, director and product specialist for 3D-IC at Ansys; Kenneth Larsen, product marketing director at Synopsys; Tony Mastroianni, advanced packaging solutions director at Siemens EDA; and Vinay Patwardhan, product management group director at Cadence... » read more

Setting Ground Rules For 3D-IC Designs

By Ed Sperling - 12 Jan, 2022 - Comments: 0

Challenges With Stacking Memory On Logic

By Ed Sperling - 22 Dec, 2021 - Comments: 1

What’s Missing For Designing Chips At The System Level

By Ed Sperling - 01 Nov, 2021 - Comments: 0

Semiconductor Engineering sat down to talk about design challenges in advanced packages and nodes with John Lee, vice president and general manager for semiconductors at Ansys; Shankar Krishnamoorthy, general manager of Synopsys' Design Group; Simon Burke, distinguished engineer at Xilinx; and Andrew Kahng, professor of CSE and ECE at UC San Diego. This discussion was held at the Ansys IDEAS co... » read more

Building Complex Chips That Last Longer

By Ed Sperling - 23 Sep, 2021 - Comments: 0

CEO Outlook: More Data, More Integration, Same Deadlines

By Ed Sperling - 24 Jun, 2021 - Comments: 1

Experts at the Table: Semiconductor Engineering sat down to discuss the future of chip design and EDA tools with Lip-Bu Tan, CEO of Cadence; Simon Segars, CEO of Arm; Joseph Sawicki, executive vice president of Siemens IC EDA; John Kibarian, CEO of PDF Solutions; Prakash Narain, president and CEO of Real Intent; Dean Drako, president and CEO of IC Manage; and Babak Taheri, CEO of Silvaco. What ... » read more

Continuing Challenges For Open-Source Verification

By Brian Bailey - 01 Jun, 2021 - Comments: 1

Experts at the Table: This is the last part of the series of articles derived from the DVCon panel that discussed Verification in the Era of Open Source. It takes the discussion beyond what happened in the panel and utilizes some of the questions that were posed, but never presented to the panelists due to lack of time. Contributing to the discussion are Ashish Darbari, CEO of Axiomise; Serge L... » read more

Standards, Open Source, and Tools

By Brian Bailey - 10 May, 2021 - Comments: 1

Experts at the Table: Semiconductor Engineering discussed what open source verification means today and what it should evolve into with Jean-Marie Brunet, senior director for the Emulation Division at Siemens EDA; Ashish Darbari, CEO of Axiomise; Simon Davidmann, CEO of Imperas Software; Serge Leef, program manager in the Microsystems Technology Office at DARPA; Tao Liu, staff hardware engineer... » read more

New Methodologies Create New Opportunities

By Brian Bailey - 27 Apr, 2021 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss what open source verification means today and what it should evolve into, with Jean-Marie Brunet, senior director for the Emulation Division at Siemens EDA; Ashish Darbari, CEO of Axiomise; Simon Davidmann, CEO of Imperas Software; Serge Leef, program manager in the Microsystems Technology Office at DARPA; Tao Liu, staff hardwa... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

category: Round Tables

category: IoT, Security & Automotive