category: Top Stories

category: IoT, Security & Automotive

Startup Funding: October 2021
By Jesse Allen - 03 Nov, 2021 - Comments: 0

Semiconductor manufacturing and packaging companies caught the attention of investors last month, with funding going to a middle-end-of-line foundry, flexible electronics manufacturer, and fab management software. Two Israeli startups are approaching AI accelerators in very different ways, while battery startups propose a variety of new chemistries in the search for the ideal electric vehicle b... » read more

Reviving The IPO Route For IP Companies
By Ed Sperling - 01 Nov, 2021 - Comments: 0

K. Charles Janac, chairman and CEO of Arteris IP, sat down with Semiconductor Engineering to talk about the company's recent decision to go public, including the benefits and risks of operating as a public IP company. SE: The rule of thumb used to be $20 million in revenue was needed for an IP company to do an IPO at the turn of the Millennium, and then it increased to $40 million about a de... » read more

What’s Missing For Designing Chips At The System Level
By Ed Sperling - 01 Nov, 2021 - Comments: 0

Semiconductor Engineering sat down to talk about design challenges in advanced packages and nodes with John Lee, vice president and general manager for semiconductors at Ansys; Shankar Krishnamoorthy, general manager of Synopsys' Design Group; Simon Burke, distinguished engineer at Xilinx; and Andrew Kahng, professor of CSE and ECE at UC San Diego. This discussion was held at the Ansys IDEAS co... » read more

What’s Next For Emulation
By Brian Bailey - 28 Oct, 2021 - Comments: 1

Emulation is now the cornerstone of verification for advanced chip designs, but how emulation will evolve to meet future demands involving increasingly dense, complex, and heterogeneous architectures isn't entirely clear. EDA companies have been investing heavily in emulation, increasing capacity, boosting performance, and adding new capabilities. Now the big question is how else they can le... » read more

Partitioning For Better Performance And Power
By Ann Mutschler - 28 Oct, 2021 - Comments: 0

Partitioning is becoming more critical and much more complex as design teams balance different ways to optimize performance and power, shifting their focus from a single chip to a package or system involving multiple chips with very specific tasks. Approaches to design partitioning have changed over the years, most recently because processor clock speeds have hit a wall while the amount of d... » read more

High-Level Synthesis For RISC-V
By Brian Bailey - 28 Oct, 2021 - Comments: 2

High-quality RISC-V implementations are becoming more numerous, but it is the extensibility of the architecture that is driving a lot of design activity. The challenge is designing and implementing custom processors without having to re-implement them every time at the register transfer level (RTL). There are two types of high-level synthesis (HLS) that need to be considered. The first is ge... » read more

3D Printing For More Circuits
By Ann R. Thryft - 27 Oct, 2021 - Comments: 0

After several years of experimentation, and growing success in volume manufacturing for some use cases, technologies for 3D printing of electronic circuits are becoming more common. Some innovations in processes and materials are moving these technologies closer to mainstream electronics manufacturing. Christopher Tuck, professor of material science at the University of Nottingham, observed ... » read more

Scaling Bump Pitches In Advanced Packaging
By Mark LaPedus - 25 Oct, 2021 - Comments: 0

Interconnects for advanced packaging are at a crossroads as an assortment of new package types are pushing further into the mainstream, with some vendors opting to extend the traditional bump approaches while others roll out new ones to replace them. The goal in all cases is to ensure signal integrity between components in IC packages as the volume of data being processed increases. But as d... » read more

Gearing Up For High-NA EUV
By Mark LaPedus - 21 Oct, 2021 - Comments: 2

The semiconductor industry is moving full speed ahead to develop high-NA EUV, but bringing up this next generation lithography system and the associated infrastructure remains a monumental and expensive task. ASML has been developing its high-numerical aperture (high-NA) EUV lithography line for some time. Basically, high-NA EUV scanners are the follow-on to today’s EUV lithography systems... » read more

Progress On General-Purpose Quantum Computers
By Katherine Derbyshire - 21 Oct, 2021 - Comments: 0

The race is on to scale up quantum computing, transforming it from an esoteric research tool into a commercially viable, general-purpose machine. Special-purpose quantum computers have been available for several years now. Systems like D-Wave’s Advantage focus on specific classes of problems that are amenable to modeling as quantum systems. Still, the ultimate goal of having a general purp... » read more

← Older posts Newer posts →

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy