ECO Fill Can Rescue Your SoC Tapeout Schedule

By Vikas Gupta - 16 Feb, 2017 - Comments: 0

By Vikas Gupta and Bhavani Prasad Integrated circuit (IC) design and manufacturing is one of the most challenging engineering industries. As soon as a design engineer gets into “the groove” and feels comfortable taping out in a particular technology node, the next technology node shrink is already there to pose a new and greater set of challenges. While it almost goes without saying that... » read more

Using Automated Pattern Matching For SRAM Physical Verification

By Elven Huang - 15 Dec, 2016 - Comments: 0

How often have you struggled to verify static random-access memory (SRAM) blocks in your design? And how often, no matter how much time you spend on them, do they end up causing manufacturing issues? Memory is a critical component in today’s SoC designs, often consuming 50% or more of the die area. SRAM blocks are typically assembled in a layout using a set of specific intellectual propert... » read more

Fill/Cut Self-Aligned Double-Patterning

By David Abercrombie - 17 Nov, 2016 - Comments: 0

By David Abercrombie, Rehab Ali, Ahmed Hamed-Fatehy, and Shetha Nolke Self-aligned double patterning (SADP) is an alternative double-patterning process to the traditional litho-etch-litho-etch (LELE) approach used in most advanced production nodes. The main difference between the two approaches is that in LELE, the layout is divided between two masks, and the second mask is aligned with resp... » read more

Creating An Accurate FEOL CMP Model

By Jeff Wilson - 20 Oct, 2016 - Comments: 0

By Ruben Ghulghazaryan, Jeff Wilson, and Ahmed AbouZeid For decades, semiconductor manufacturers have used chemical-mechanical polishing (CMP) as the primary technique for the smoothing and leveling (planarization) of dielectrics and metal layers. CMP modeling allows design and manufacturing teams to find and fix potential planarization issues before the actual CMP process is applied to a ... » read more

The Pitfalls Of Auto-Stitching In Double-Patterning

By David Abercrombie - 22 Sep, 2016 - Comments: 0

Ever since the first double-pattern (DP) odd-cycle error ring was produced on a layout, designers have longed for a magic solution to solve it. Traditionally, the first approach to fixing an odd-cycle error was to move a polygon or a polygon edge to increase spacing to an adjoining polygon in the cycle. Alternatively, you could remove a polygon altogether, or split it into two pieces. All of th... » read more

Device Pin-Specific Property Extraction For Layout Simulation

By Phil Brooks - 18 Aug, 2016 - Comments: 0

As we work through the sub-20 nm design space, the interactions between and effects on devices that are near each other are becoming critical factors in achieving the desired electrical performance. Accurate extraction of device pin-specific properties for modelling these effects is essential to attaining design goals. LVS extraction challenges Layout vs. schematic (LVS) comparison tools prov... » read more

Colorless vs. Colored Double-Patterning Design Flows

By David Abercrombie - 21 Jul, 2016 - Comments: 0

Colored vs. Colorless double patterning design flows—do you know which one is best for your design? What options does your foundry allow? Do you debug one differently from the other? In this short video, I’ll demonstrate the differences between colored and colorless DP design flows, and explain the options and potential pitfalls of each approach. With a better understanding of how to design... » read more

Pattern Matching In Test And Yield Analysis

By Geir Eide - 23 Jun, 2016 - Comments: 1

By Jonathan Muirhead and Geir Eide It’s no secret that a successful yield ramp directly impacts integrated circuit (IC) product cost and time-to-market. Tools and techniques that help companies ramp to volume faster, while also reducing process and design variability, can be the difference between profit and loss in a competitive market. And while pattern matching technology has been aroun... » read more

Pattern Matching in Design and Verification

By Michael White - 19 May, 2016 - Comments: 0

Pattern matching (PM) was first introduced as the semiconductor industry began to shift from simple one-dimensional rule checks to the two-dimensional checks required by sub-resolution lithography. These rule checks proved far more complex to write, hard to code for fast runtimes, and difficult to debug. Incorporating an automated visual capture and compare process enabled designers to define t... » read more

ECOs and Multi-Patterning: It Can Be Done

By David Abercrombie - 21 Apr, 2016 - Comments: 0

By David Abercrombie and Alex Pearson A lot has been written and discussed about how to decompose (color) layouts for advanced process nodes that require multipatterning (MP). However, one topic that has been sorely ignored is how to efficiently make changes to designs that are already colored, or even taped out and processed. We tend to act like all designs work out the first time through... » read more

← Older posts

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.