Manufactured hybrid adhesive film has effective use, especially for electronic devices that require deoxidization and adhesion (semiconductor packaging).
Abstract:
“Epoxy resins with acidic compounds feature adhesion, robustness, and deoxidizing ability. In this study, hybrid adhesive films with deoxidizing and curing capabilities for semiconductor packaging were fabricated. The compatibilizing effects and mechanical properties were chiefly investigated by using various additive binders (thermoplastic amorphous polymers) and compatibilizing agents. The curing, deoxidizing, thermal, and rheological properties were systematically investigated. For uniform film formation and maximizing deoxidizing curable abilities, a thermoplastic–thermoset mixture containing a phenyl and carboxylic acid-based additive (benzoic acid), and a polycarbonate was chosen as the model adhesive film. Without either a phenyl or an acidic group in the compatibilizing agent, deoxidizing and compatibilizing effects were not achieved. The manufactured hybrid adhesive film can be effectively used, especially for electronic devices that require deoxidization and adhesion.”
View this open access technical paper here. Published 04/2021.
Lee B-Y, Lee D-H, Jang K-S. Impact Modifiers and Compatibilizers for Versatile Epoxy-Based Adhesive Films with Curing and Deoxidizing Capabilities. Polymers. 2021; 13(7):1129.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Continued expansion in new and existing markets points to massive and sustained growth.
Experts at the Table: Designing for context, and geopolitical impacts on a global supply chain.
Funding rolls in for photonics and batteries; 88 startups raise $1.3B.
Why UCIe is so important for heterogeneous integration.
Interest in this particular ISA is expanding, but the growth of other open-source hardware is less certain.
Nanosheets are likeliest option throughout this decade, with CFETs and other exotic structures possible after that.
Hybrid bonding opens up whole new level of performance in packaging, but it’s not the only improvement.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Why this is becoming a bigger issue, and what can be done to mitigate the effects.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Disaggregation and the wind-down of Moore’s Law have changed everything.
Leave a Reply