Researchers perform practical testing of LoraWaN end devices to consider energy, safety limitations and security considerations.
New academic research paper from University of Sarajevo and Technical University of Ostrava.
Abstract:
“With the development of electronics and communication techniques, the interest in realizing sensor networks with a large number of end nodes is growing. The main idea is to install devices in remote locations without direct supervision, which requires an uninterrupted power supply and secure communication to the rest of the network. In this paper, an experimental comparative analysis of popular practical LoraWAN end nodes (WisNode RAK811 and Seeeduino SX1301) regarding energy consumption in different security modes, spreading factors, energy consumption in sleep/idle mode as well as the security keys extraction from memory was performed.”
Find the open access technical paper here. Published 2022.
1110-0168 Ó 2022 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University
This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Visit Semiconductor Engineering’s Technical Paper library here and discover many more chip industry academic papers.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Different interconnect standards and packaging options being readied for mass chiplet adoption.
Continued expansion in new and existing markets points to massive and sustained growth.
Experts at the Table: Designing for context, and geopolitical impacts on a global supply chain.
Funding rolls in for photonics and batteries; 88 startups raise $1.3B.
Interest in this particular ISA is expanding, but the growth of other open-source hardware is less certain.
Nanosheets are likeliest option throughout this decade, with CFETs and other exotic structures possible after that.
Hybrid bonding opens up whole new level of performance in packaging, but it’s not the only improvement.
Why this is becoming a bigger issue, and what can be done to mitigate the effects.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Disaggregation and the wind-down of Moore’s Law have changed everything.
Leave a Reply