Challenges At Advanced Nodes

By Ed Sperling - 19 Aug, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss finFETs, 22nm FD-SOI and how the how the market will segment over the next few years with Marie Semeria, CEO of [getentity id="22192" e_name="Leti"]; Patrick Soheili, vice president of product management and corporate development at [getentity id="22242" e_name="eSilicon"]; Paul Boudre, CEO of Soitec; and Subramani Kengeri, vice president of global ... » read more

2.5D Creeps Into SoC Designs

By Ed Sperling - 13 Aug, 2015 - Comments: 0

A decade ago top chipmakers predicted that the next frontier for SoC architectures would be the z axis, adding a third dimension to improve throughput and performance, reduce congestion around memories, and reduce the amount of energy needed to drive signals. The obvious market for this was applications processors for mobile devices, and the first companies to jump on the stacked die bandwag... » read more

Executive Insight: Aart de Geus

By Ed Sperling - 10 Aug, 2015 - Comments: 0

Aart de Geus, chairman and co-CEO of Synopsys, sat down with Semiconductor Engineering to talk about acquisitions, software and EDA. What follows are excerpts of that interview, which was conducted in front of a live audience at DAC. SE: A lot of Synopsys' investments are moving in a new direction, namely software. Why is that becoming so important to your company? De Geus: It's not a dif... » read more

Technology Tsunami Approaches

By Brian Bailey - 27 Jul, 2015 - Comments: 0

How many times have we heard the saying that technology advancements are accelerating and that inevitably the older generation will have increasing problems keeping up with the new advancements? This happened to me with software development methodologies over fifteen years ago. I still program, when people actually let me, using basically the same techniques I learned when I was in my teens.... » read more

What Will 7nm And 5nm Look Like?

By Mark LaPedus - 23 Jul, 2015 - Comments: 0

Citing an assortment of undisclosed manufacturing issues, Intel in July pushed out the introduction of its 10nm chip and process technology to the second half of 2017. This is roughly six or more months later than expected. With the delay at 10nm, [getentity id="22846" e_name="Intel"] also pushed out its process cadence from 2 to 2.5 years. Other foundries, meanwhile, are struggling to keep ... » read more

Power Breaks Everything

By Ed Sperling - 15 Jul, 2015 - Comments: 2

The emphasis on lowering power in everything from wearable electronics to data centers is turning into a perfect storm for the semiconductor ecosystem. Existing methodologies need to be fixed, techniques need to be improved, and expectations need to be adjusted. And even then the problems won't go away. In the past, most issues involving power—notably current leakage, physical effects such... » read more

Here Comes 7nm

By Ed Sperling - 09 Jul, 2015 - Comments: 0

A consortium of companies involving IBM, GlobalFoundries and Samsung has rolled out the first 7nm test chip using silicon germanium as a substrate, using EUV to pattern multiple layers. While this doesn't mean the cost equation is even close to being solved, or that more than a handful of companies will push forward to that node anytime soon using SiGe as the substrate material, it does cre... » read more

The Future Of Moore’s Law

By Ed Sperling - 29 Jun, 2015 - Comments: 1

Semiconductor Engineering sat down to discuss the future of Moore's Law with Jan Rabaey, Donald O. Pederson distinguished professor at [getentity id="22165" comment="UC Berkeley"]; Lucio Lanza, managing director of Lanza techVentures; Subramani Kengeri, vice president of advanced technology architecture at [getentity id="22819" comment="GlobalFoundries"]; Charlie Cheng, CEO of [getentity id="2... » read more

IP Market Shifts Direction

By Ed Sperling - 03 Jun, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss intellectual property changes and challenges with Patrick Soheili, vice president of product management and corporate development at [getentity id="22242" e_name="eSilicon"]; Navraj Nandra, senior director of marketing for DesignWare analog and MSIP at [getentity id="22035" e_name="Synopsys"]; Kurt Shuler, vice president of marketing at [getentity i... » read more

One-On-One: Thomas Caulfield

By Mark LaPedus - 21 May, 2015 - Comments: 0

Semiconductor Engineering sat down to talk about fabs, process technology and the equipment industry with Thomas Caulfield, senior vice president and general manager of Fab 8 at [getentity id="22819" comment="GlobalFoundries"]. Located in Saratoga County, N.Y., Fab 8 is GlobalFoundries’ most advanced 300mm wafer fab. What follows are excerpts of that discussion. SE: Last year, GlobalFoundr... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

Legacy Process Nodes Going Strong

The critical, and growing, significance of mature node chips and processes.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

tag: 3D-IC