More EUV Mask Gaps

By Mark LaPedus - 17 Nov, 2016 - Comments: 12

Extreme ultraviolet (EUV) lithography is at a critical juncture. After several delays and glitches, [gettech id="31045" comment="EUV"] is now targeted for 7nm and/or 5nm. But there are still a number of technologies that must come together before EUV is inserted into mass production. And if the pieces don’t fall into place, EUV could slip again. First, the EUV source must generate more ... » read more

Mask Maker Worries Grow

By Mark LaPedus - 18 Aug, 2016 - Comments: 2

Leading-edge photomask makers face a multitude of challenges as they migrate from the 14nm node and beyond. Mask making is becoming more challenging and expensive at each node on at least two fronts. On one front, mask makers must continue to invest in the development of traditional optical masks at advanced nodes. On another front, several photomask vendors are preparing for the possible ra... » read more

Where Is Next-Gen Lithography?

By Mark LaPedus - 31 Mar, 2016 - Comments: 2

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Greg McIntyre, director of the Advanced Patterning Department at [getentity id="22217" comment="Imec"]; Harry Levinson, senior fellow and senior director of technology research at [getentity id="22819" comment="GlobalFoundries"]; Uday Mitra, vice president and head of strategy and marketing for the Etch Bu... » read more

Where Is Next-Gen Lithography?

By Mark LaPedus - 17 Mar, 2016 - Comments: 4

Next EUV Challenge: Mask Inspection

By Mark LaPedus - 16 Apr, 2015 - Comments: 2

Extreme ultraviolet ([gettech id="31045" comment="EUV"]) lithography is still not ready for prime time, but the technology finally is moving in the right direction. The EUV light source, for example, is making progress after years of delays and setbacks. Now, amid a possible breakthrough in EUV, the industry is revisiting a nagging issue and asking a simple question: How do you inspect EUV p... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: actinic inspection

More EUV Mask Gaps

Mask Maker Worries Grow

Where Is Next-Gen Lithography?

Where Is Next-Gen Lithography?

Next EUV Challenge: Mask Inspection