Trouble Spots And Optimism For 2015

By Ed Sperling - 18 Dec, 2014 - Comments: 0

Most top executives in the semiconductor industry are bullish about 2015 and even beyond, particularly as the [getkc id="76" comment="Internet of Things"] begins to drive new markets and market mash-ups, and as more semiconductors find their way into markets such as automotive, health-care and manufacturing. But it's not an entirely rosy picture, and top executives point to potential trouble sp... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 27 Jun, 2014 - Comments: 0

As semiconductor technology becomes more challenging, expect more mergers and acquisitions in the fab tool sector. In a research report issued this week, Weston Twigg, an analyst with Pacific Crest Securities, sees several possible M&A scenarios in the future. There is no evidence that any deal is pending right now. But according to Twigg, here are some possible M&As that could happen i... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 30 May, 2014 - Comments: 0

GlobalFoundries’ campus in upstate New York employs over 2,200 workers. It is looking to add 600-800 more people by the end of 2014. The company is seeking out engineers with four-year degrees and technicians with associates degrees. It is also bringing in engineers from IBM to ramp its fab in New York. Applied Materials introduced the Endura Ventura PVD system that helps reduce the cost o... » read more

Week In Review: Manufacturing And Design

By Mark LaPedus - 20 Dec, 2013 - Comments: 0

Wearable computing is one of the hottest topics being discussed today. Angela McIntyre, research director at Gartner, said digital health and fitness will be among the hottest segments in the arena. Don't look now, but ASML Holding has delayed its 450mm tool programs. "As for 450, ASML has paused the development of 450mm lithography systems, both EUV and 193, until customer demand and the ti... » read more

Value Shift

By Ed Sperling - 27 Jan, 2010 - Comments: 0

System Level Design talks with Tom Quan of TSMC, John Koeter of Synopsys, Kalar Rajendiran of eSilicon and Phil Yastrow of Avago about where the value has shifted in the semiconductor design chain and why. [youtube vid=MvSaHSYDqVQ] » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: Avago

Trouble Spots And Optimism For 2015

The Week In Review: Manufacturing

The Week In Review: Manufacturing

Week In Review: Manufacturing And Design

Value Shift