Nanoimprint Finally Finds Its Footing

By Gregory Haley - 20 Apr, 2023 - Comments: 2

Nanoimprint lithography, which for decades has trailed behind traditional optical lithography, is emerging as the technology of choice for the rapidly growing photonics and biotech chips markets. First introduced in the mid-1990s, nanoimprint lithography (NIL) has consistently been touted as a lower-cost alternative to traditional optical lithography. Even today, NIL potentially is capable o... » read more

Overlay Control for Nanoimprint Lithography

By Technical Paper Link - 31 Dec, 2017 - Comments: 0

Abstract: Nanoimprint lithography (NIL) is a promising technique for fine-patterning with a lower cost than other lithography techniques such as EUV or immersion with multi-patterning. NIL has the potential of "single" patterning for both line patterns and hole patterns with a half-pitch of less than 20nm. NIL tools for semiconductor manufacturing employ die- by-die alignment system ... » read more

Multiple Lithography Options Still Remain in Play

By Paula Doe - 03 Aug, 2015 - Comments: 1

The throughput and uptime of EUV, and the overlay accuracy of 193nm immersion lithography, continue to steadily improve, though neither is yet ready for 10nm production, according to speakers at SEMICON West. Mike Lercel, ASML director, Product Marketing, reported several EUV tool sites achieved 70 percent uptime for more than a week, and one customer site had done so for more than four ... » read more

What Happened To Next-Gen Lithography?

By Mark LaPedus - 03 Sep, 2014 - Comments: 2

Chipmakers continue to march down the process technology curve. Using today’s optical lithography and multiple patterning, the semiconductor industry is scaling its leading-edge devices far beyond what was once considered possible. The question is how far can the industry extend 193nm immersion [getkc id="80" comment="lithography"] and multiple patterning before these technologies become t... » read more

Knowledge Centers
Entities, people and technologies explored

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

Legacy Process Nodes Going Strong

The critical, and growing, significance of mature node chips and processes.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: Canon Nanotechnologies

Nanoimprint Finally Finds Its Footing

Overlay Control for Nanoimprint Lithography

Multiple Lithography Options Still Remain in Play

What Happened To Next-Gen Lithography?

Trending Articles

Hybrid Bonding Makes Strides Toward Manufacturability

Metrology Advances Step Up To Sub-2nm Device Node Needs

Americas Chip Funding Energizes Industry

Advanced Packaging Driving New Collaboration Across Supply Chain

Startup Funding: Q3 2024

Knowledge Centers
Entities, people and technologies explored