Hardware Security Threat Rising

By Ed Sperling - 02 Aug, 2018 - Comments: 0

Martin Scott, senior vice president and CTO of Rambus, sat down with Semiconductor Engineering to talk about an increasing problem with security, what's driving it, and why hardware is now part of the growing attack surface. What follows are excerpts of that conversation. SE: With Meltdown and Spectre, the stakes have changed because the focus is not on using hardware to get to software. It'... » read more

Mixed Outlook For Semi Biz

By Mark LaPedus - 25 Jul, 2018 - Comments: 0

Both the IC and fab equipment industries have been enjoying a boom cycle for some time, but they could be facing speed bumps and possibly turbulence in the second half of this year and into 2019. In the first half of 2018, the industry was fueled by the momentum carried over from 2017. DRAM prices remained relatively high, which contributed to the revenue growth in the overall IC industry. M... » read more

The Financial Justification For System-Level Test

By Astronics - 23 Jul, 2018 - Comments: 0

Three unique trends are currently transforming high-volume manufacturing in the semiconductor industry: The increasing complexity of chip architectures (e.g., FinFET, heterogeneous integration); The explosion in the breadth and ubiquity of consumer electronics (e.g. IoT, mobile, and automotive), and Consumer expectations of a constant stream of newer, cheaper, more advanced nodes. ... » read more

Preparing For A 5G World

By Ed Sperling - 12 Jul, 2018 - Comments: 0

Semiconductor Engineering sat down to talk about challenges and progress in 5G with Yorgos Koutsoyannopoulos, president and CEO of Helic; Mike Fitton, senior director of strategic planning and business development at Achronix; Sarah Yost, senior product marketing manager at National Instruments; and Arvind Vel, director of product management at ANSYS. What follows are excerpts of that conversat... » read more

New Transistor Types Vs. Packaging

By Ed Sperling - 11 Jun, 2018 - Comments: 0

Plans are being formulated for the rollout of multiple types of gate-all-around FETs and literally dozens of advanced packaging options. The question now is which ones will achieve critical mass, because there aren't enough chips in the world to support all of them profitably. FinFETs, which were first introduced by Intel at 22nm, are running out of steam. While they will survive 10/7nm, and... » read more

The Long Pause

By Ed Sperling - 07 Jun, 2018 - Comments: 0

Carmakers are leaping over each other to roll out cars that meet SAE Level 3 requirements, whereby under some conditions drivers can let go of the steering wheel. Getting to Level 5 will take a lot longer, and there is some debate about where and even whether Level 4 will ever happen (see Fig. 1). Fig. 1: Levels of autonomy. Source: Auto Alliance There are two big gaps that need to be a... » read more

Progress And Chaos On Road To Autonomy

By Jeff Dorsch - 03 Jun, 2018 - Comments: 1

Progress in the development of fully autonomous vehicles is incremental and slow, but not for lack of effort. Research and development in self-driving cars is under way all around the globe, from the biggest automotive manufacturers and their Tier 1 suppliers to companies not traditionally involved in the automotive industry. Add to that fleets of startups working on sensor technologies and ... » read more

The 3D Printing Revolution

By Ed Sperling - 24 May, 2018 - Comments: 1

3D printing always has been intriguing. More recently, it has become truly useful. And in the near future, it will become increasingly controversial. There are videos on YouTube documenting entire homes that are being printed in as little as 8 hours, priced as low as $4,000. So while there is a lot of buzz about AI eliminating jobs, 3D printing could add become another significant threat. ... » read more

The Power Of De-Integration

By Ed Sperling - 17 May, 2018 - Comments: 0

The idea that more functionality can be added into a single chip, or even into a single system, is falling out of vogue. For an increasing number of applications, it's no longer considered the best option for boosting performance or lowering power, and it costs too much. Hooman Moshar, vice president of engineering at Broadcom, said in a keynote speech at Mentor's User2User conference this w... » read more

Wafer Demand: Under Pressure But Still Growing

By Joanne Itow - 19 Mar, 2018 - Comments: 1

Wafer demand grew 10.7% in 2017 while total semiconductor units grew 13.4%. Due to the tight supply of silicon wafers and increased prices, most manufactures placed an even higher priority on improving yields. The industry’s focus on yield improvements is relentless but especially important when the cost of key input materials is on the rise. In 2017 the semiconductor products that con... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: economics