tag: European Commission

Manufacturing Bits: Sept. 12
By Mark LaPedus - 12 Sep, 2017 - Comments: 0

Failure analysis for 2.5D/3D chips Imec has developed a new failure analysis method to localize interconnection failures in 2.5D/3D stack die with through-silicon vias (TSVs). This technique is called LICA, which stands for light-induced capacitance alteration. It addresses the reliability issues for 2.5D/3D devices in a non-destructive and cost-effective manner at the wafer level. For s... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 11 Aug, 2017 - Comments: 0

Fab tools Lam Research held an analyst event this week. The company indicated that the industry is in the midst of a memory boom, including both DRAM and 3D NAND. According to Amit Daryanani, an analyst with RBC, here was one of the big takeaways at the event: “The memory spend portion of WFE is more sustainable than previously assumed due to end-market drivers such as big data, automation, ... » read more

The Week In Review: IoT
By Jeff Dorsch - 16 Jun, 2017 - Comments: 0

Market Research International Data Corp. updated its Worldwide Semiannual Internet of Things Spending Guide, forecasting global IoT spending will increase 16.7% this year to more than $800 billion. The market research firm says the market will grow to almost $1.4 trillion by 2021. Manufacturing, smart grid technologies, freight monitoring, production asset management, and smart building techno... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 03 Mar, 2017 - Comments: 2

SPIE news At this week’s SPIE Advanced Lithography conference, the industry paid close attention to the progress of extreme ultraviolet (EUV) lithography. Here’s the general report card: EUV is making noticeable progress, but there are still some challenges ahead, such as the power source, resists and pellicles. Several issues need to be resolved before chipmakers can put EUV into mass... » read more

Manufacturing Bits: Nov. 23
By Mark LaPedus - 23 Nov, 2016 - Comments: 1

Materials database The Department of Energy’s Lawrence Berkeley National Laboratory has published a study that quantifies the thermodynamic scale of metastability of some 29,902 materials. To quantify the materials, researchers used Berkeley Lab’s Materials Project, a large and open database of known and predicted materials. The open and Web-based database has calculated the properties ... » read more

Manufacturing Bits: July 26
By Mark LaPedus - 26 Jul, 2016 - Comments: 0

Jumping films Riken and the University of Tokyo have developed a tiny autonomous actuator. The actuator, which is based on a special material, can automatically curl up or straighten out when exposed to ambient humidity. And in certain conditions, the film can even jump into the air by itself. A video can be seen here. Researchers placed a material called guanidinium carbonate into a hig... » read more

Manufacturing Bits: June 14
By Mark LaPedus - 14 Jun, 2016 - Comments: 0

3D printed neural networks The European Commission has launched a program that will replicate the brain’s neural network using 3D nano-printing. The program, dubbed the MESO-BRAIN consortium, has received an award of €3.3 million in funding from the European Commission. This research, led by Aston University, also involves Axol Bioscience, Laser Zentrum, the University of Barcelona, th... » read more

Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy