Week In Review: Manufacturing, Test

By Mark LaPedus - 07 Sep, 2018 - Comments: 0

Packaging Brewer Science has introduced the latest additions to its family of temporary bonding materials. The company also rolled out its new line of thin spin-on packaging materials. The company’s temporary bonding materials are called BrewerBOND. The new products, called the BrewerBOND T1100 and BrewerBOND C1300 series, are combine to create a dual-layer system for temporary bonding a... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 03 Jun, 2016 - Comments: 0

Chipmakers Through a joint venture with the government of Chongqing, GlobalFoundries will take over an existing 200mm fab in China. Then, GlobalFoundries plans to retrofit the facility and turn it into a 300mm fab. The foundry vendor is transferring its 180nm and 130nm processes to the China fab. Meanwhile, TSMC, UMC and others are also building fabs in China. Samsung Electronics has begu... » read more

10nm Fab Watch

By Mark LaPedus - 21 May, 2015 - Comments: 1

When will the 10nm logic node happen? Analysts believe that foundry vendors will move into 10nm finFET volume production around 2017. Still others say the 10nm finFET ramp could take place anywhere from 2018 to 2020. The predictions are all over the map. One way to predict the timing, progress and demand for 10nm is simple: Follow the fabs. In fact, Intel, Samsung, TSMC and GlobalFound... » read more

Fab Tool R&D And Ramen Noodles

By Mark LaPedus - 22 Jan, 2015 - Comments: 0

The semiconductor equipment and materials industry has always been a tough business. Over the years, vendors have been under pressure to develop new technologies for a shrinking but demanding customer base. And as a result, many vendors could not keep up, or elected to exit the business, causing a massive shakeout in the industry. It isn’t getting any easier, though. Today, tool and... » read more

Changes Ahead

By Ed Sperling - 17 Oct, 2012 - Comments: 0

Semiconductor Manufacturing & Design talks with GlobalFoundries EVP Mike Noonen about future challenges in IC manufacturing, the future of stacked die and ecosystem challenges ahead. [youtube vid=Wdp9JYvBeSk] » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: fab

Week In Review: Manufacturing, Test

The Week In Review: Manufacturing

10nm Fab Watch

Fab Tool R&D And Ramen Noodles

Changes Ahead