tag: Flexible Hybrid Electronics

Weaving A Digital Thread For Design And Manufacture Of Additive Electronics
By Dave Wiens - 04 Jan, 2024 - Comments: 0

Additive manufacturing has been around electronics since thick-film, screened hybrids came on the scene more than 30 years ago. And while those never quite went away, they never gained the prominence we all expected alongside the more traditional laminated, subtractive-etched PCBs. Today, emerging technologies are bringing a resurgence in additive manufacturing, also known as printed electro... » read more

FLEX 2023 Takeaways: Flexible And Printed Electronics Move Into Electronics Manufacturing
By Gity Samadi - 17 Aug, 2023 - Comments: 0

By Gity Samadi and Paul Semenza The FLEX Conference, held again this year in conjunction with SEMICON West 2023, provided numerous examples of continued developments in flexible, printed, and flexible hybrid electronics technologies applied to sensing, robotics, communications, and other applications. At the same time, there is growing focus on applying various additive manufacturing equipme... » read more

Flexible Hybrid Electronics: Future Standards For Next-Gen 5G/mmWave Wearable and Conformal Applications
By Technical Paper Link - 15 Aug, 2023 - Comments: 0

A technical paper titled “Additively manufactured flexible on-package phased array antennas for 5G/mmWave wearable and conformal digital twin and massive MIMO applications” was published by researchers at Georgia Institute of Technology. Abstract: "This paper thoroughly investigates material characterization, reliability evaluation, fabrication, and assembly processes of additively manufa... » read more

Room-Temperature Metal Bonding Technology That Facilitates The Fabrication of 3D-ICs & 3D Integration With Heterogeneous Devices
By Technical Paper Link - 19 Mar, 2023 - Comments: 0

A technical paper titled "Room-Temperature Direct Cu Semi-Additive Plating (SAP) Bonding for Chip-on-Wafer 3D Heterogenous Integration With μLED" was published by researchers at Tohoku University in Japan. Abstract: "This letter describes a direct Cu bonding technology to there-dimensionally integrate heterogeneous dielets based on a chip-on-wafer configuration. 100- μm -cubed blue μ LED... » read more

Additive Techniques For Flexible Hybrid Electronics Packaging And Integration With Human Body
By Gity Samadi - 20 Oct, 2022 - Comments: 0

By Gity Samadi and Paul Semenza Flexible hybrid electronics (FHE) has spawned the development of novel packaging techniques to overcome the application limitations of the rigid boards, high-temperature solders, bulky component packages, and insertion processes used in traditional printed circuit boards. Thin, flexible substrates, bare die, and combinations of printed and small-format package... » read more

Chiplet-Based Advanced Packaging Technology from 3D/TSV to FOWLP/FHE
By Technical Paper Link - 27 Aug, 2021 - Comments: 0

T. Fukushima, "Chiplet-Based Advanced Packaging Technology from 3D/TSV to FOWLP/FHE," 2021 Symposium on VLSI Circuits, 2021, pp. 1-2, doi: 10.23919/VLSICircuits52068.2021.9492335. Abstract: "More recently, "chiplets" are expected for further scaling the performance of LSI systems. However, system integration with the chiplets is not a new methodology. The basic concept dates back well over ... » read more

The Good, Bad And Unknowns Of Flexible Devices
By Ed Sperling - 27 Jan, 2021 - Comments: 0

Flexible hybrid electronics are beginning to proliferate in consumer, medical, and industrial applications due to their comparatively low weight, thin profile, and the ability to literally bend the rules of design. Open any smart phone today and you're likely to find one or more of these flexible boards. Unlike standard printed circuit boards, FHE devices are printed using a combination of r... » read more

Week In Review: Auto, Security, Pervasive Computing
By Susan Rambo - 02 Jul, 2020 - Comments: 0

The American Foundries Act, a bipartisan initiative to revive U.S. leadership in the global microelectronics sector, was announced by U.S. Democratic Senator Chuck Schumer from New York. “The economic and national security risks posed by relying too heavily on foreign semiconductor suppliers cannot be ignored, and Upstate New York, which has a robust semiconductor sector, is the perfect place... » read more

Challenges In Printed And Disposable Chips
By Susan Rambo And Ed Sperling - 05 Mar, 2020 - Comments: 0

Printing inexpensive chips using technology developed for newspapers and magazines is gaining traction across a wide range of applications, from photovoltaic cells to sensors on a flexible substrate. But it's also adding a slew of new challenges that are unique to this approach. The world of flexible hybrid electronics (FHE) — printing integrated circuits on or attaching thin IC chips to a... » read more

Printed Sensor Market Expands
By Nick Skelton - 17 Oct, 2019 - Comments: 0

The growing use of actionable information in new ways to make better decisions is driving brisk growth in printed electronics (PE) and sensors. According to BCC Research, the global market for sensors should grow from $173.4 billion in 2019 to reach $323.3 billion by 2024 – a compound annual growth rate (CAGR) of 13.3%. Where will this growth come from? Where are the immediate, and longer-... » read more

← Older posts

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy