5 Issues Under The Foundry Radar

By Mark LaPedus - 16 Apr, 2015 - Comments: 0

In the foundry business, the leading-edge segment grabs most, if not all, of the headlines. Foundry vendors, of course, are ramping up 16nm/14nm finFET processes, with 10nm and 7nm in R&D. The leading-edge foundry business is sizable, but it’s not the only thing going on in the competitive arena. In fact, there are battles taking place in many other foundry segments, such as 2.5D/3D packag... » read more

RF SOI Foundry Biz Heats Up

By Mark LaPedus - 13 Nov, 2014 - Comments: 0

The foundry business is undergoing a new round of acquisition and fab expansion activity. As before, the big foundry vendors are getting bigger, while some may fall by the wayside. And at times, the events cause some uncertainty, if not jitters, in the supply chain. For example, [getentity id="22819" comment="GlobalFoundries"]in October signed a definitive agreement to acquire the chip uni... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 23 May, 2014 - Comments: 1

About 150 to 200 employees from IBM’s chip unit will be dispatched to work at GlobalFoundries, according to the Poughkeepsie Journal. GlobalFoundries said the arrangement is temporary, according to the report. GlobalFoundries is the leading candidate to buy IBM’s chip unit, which is apparently on the block. To date, however, GlobalFoundries and IBM have yet to make any announcements on the... » read more

Week In Review: Manufacturing, Design, Test

By Mark LaPedus - 31 Jan, 2014 - Comments: 0

The technology of 3D "bioprinting" (the medical application of 3D printing to produce living tissue and organs) is advancing so quickly that it will spark a major ethical debate on its use by 2016, according to Gartner. At the same time, 3D printing of non-living medical devices such as prosthetic limbs, combined with a burgeoning population and insufficient levels of healthcare in emerging mar... » read more

RF SOI Market Heats Up

By Mark LaPedus - 29 Oct, 2013 - Comments: 0

GlobalFoundries has entered the radio-frequency silicon-on-insulator (RF SOI) foundry business as part of an alliance with Peregrine Semiconductor. As part of the move, Peregrine is entering the RF SOI chip market in an effort to develop lower cost devices. Peregrine is sampling the first RF switch devices based on its new RF SOI process, dubbed UltraCMOS 10 RF SOI. The 130nm technology... » read more

Week In Review: Manufacturing & Design

By Mark LaPedus - 25 Oct, 2013 - Comments: 0

Don’t look now, but Intel is expanding its foundry business. Previously, Intel garnered a small collection of foundry customers. But Intel would not entertain foundry customers that had competitive products based on ARM chips. Apparently, Intel is having a change of heart. “I think they’ve changed their position,” said Nathan Brookwood, a research fellow at Insight 64. “They will do A... » read more

The Week In Review: Aug 5

By Ed Sperling - 05 Aug, 2013 - Comments: 0

By Mark LaPedus According to a nationwide online survey conducted by Harris Interactive on behalf of Crucial.com, 36% of those Americans who experienced PC problems in the past six months admit they have lashed out at their slow, underperforming computers by using profanity, screaming and shouting, or by striking it with a fist or other object. Those who experienced computer problems also indi... » read more

Foundries Eye 300mm Analog Fabs

By Mark LaPedus - 18 Jul, 2013 - Comments: 0

By Mark LaPedus In 2009, Texas Instruments changed the semiconductor landscape when it opened the industry’s first 300mm fab for analog chips. Until then, analog chip production was conducted in fabs at 200mm wafer sizes and below. With a 300mm fab, TI potentially could gain a die-size and cost advantage over its analog rivals. On paper, a 300mm wafer provides 2.5 times more chips than a... » read more

New Foundry Gold Rush: RF SOI

By Mark LaPedus - 16 May, 2013 - Comments: 0

By Mark LaPedus About every five years or so, a new and hot market emerges in the specialty foundry business that resembles a frenetic gold rush. The last big gold rush occurred around 2008, when more than a dozen foundries jumped into the bipolar-CMOS-DMOS (BCD) market to capitalize on the booming power-management sector. Now, the next gold rush is centering on an emerging technology—th... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.