What Happened To DSA?

By Mark LaPedus - 19 May, 2016 - Comments: 2

Directed self-assembly (DSA) was until recently a rising star in the next-generation lithography (NGL) landscape, but the technology has recently lost some of its luster, if not its momentum. So what happened? Nearly five years ago, an obscure patterning technology called [gettech id="31046" t_name="DSA"] burst onto the scene and began to generate momentum in the industry. At about that t... » read more

Where Is Next-Gen Lithography?

By Mark LaPedus - 11 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Greg McIntyre, director of the Advanced Patterning Department at Imec; Harry Levinson, senior fellow and senior director of technology research at GlobalFoundries; Uday Mitra, vice president and head of strategy and marketing for the Etch Business Unit and Patterning Module at Applied Materials; Naoya Haya... » read more

Pain Points At 7nm

By Ed Sperling - 24 Mar, 2016 - Comments: 3

Early work has begun on 7nm. Process technology has progressed to the point where IP and tools are being qualified. There is still a long way to go. But as companies begin engaging with foundries on this process node—[getentity id="22586" comment="TSMC"] is talking publicly about it, but [getentity id="22846" e_name="Intel"], [getentity id="22819" comment="GlobalFoundries"] and [getentity ... » read more

Multi-Beam Market Heats Up

By Mark LaPedus - 17 Mar, 2016 - Comments: 3

The multi-beam e-beam mask writer business is heating up, as Intel and NuFlare have separately entered the emerging market. In one surprising move, [getentity id="22846" e_name="Intel"] is in the process of acquiring IMS Nanofabrication, a [gettech id="31058" t_name="multi-beam e-beam"] equipment vendor. And separately, e-beam giant NuFlare recently disclosed its new multi-beam mask writer t... » read more

7nm Lithography Choices

By Mark LaPedus - 07 Mar, 2016 - Comments: 2

Chipmakers are ramping up their 16nm/14nm logic processes, with 10nm expected to move into early production later this year. Barring a major breakthrough in lithography, chipmakers are using today’s 193nm immersion and multiple patterning for both 16/14nm and 10nm. Now, chipmakers are focusing on the lithography options for 7nm. For this, they hope to use a combination of two technologies ... » read more

Inside Multi-Beam E-Beam Lithography

By Mark LaPedus - 19 Nov, 2015 - Comments: 4

Semiconductor Engineering sat down with David Lam, chairman of Multibeam, a developer of multi-beam e-beam tools for direct-write lithography applications. Lam is also a venture capitalist. He founded Lam Research in 1980, but left as an employee in 1985. What follows are excerpts of that conversation. SE: How has the equipment business changed over the years and what’s the state of the i... » read more

More Choices, Less Certainty

By Ed Sperling - 04 Nov, 2015 - Comments: 3

The increasing cost of feature scaling is splintering the chip market, injecting uncertainty into a global supply chain that has been continually fine-tuned for decades. Those with deep enough resources and a clear need for density will likely follow Moore's Law, at least until 7nm. What comes after that will depend on a variety of factors ranging from available lithography—EUV, multi-bea... » read more

Finding Defects Is Getting Harder

By Mark LaPedus - 17 Sep, 2015 - Comments: 1

Chipmakers are plotting out a strategy to scale the transistor to 10nm and beyond. Migrating to these nodes presents a number of challenges, but one issue is starting to gain more attention in the market—killer defects. Defects have always been problematic in the yield ramp for chip designs, but the ability to find them is becoming more difficult and expensive at each node. And it will be... » read more

5 Technologies To Watch

By Mark LaPedus - 23 Jul, 2015 - Comments: 0

The industry is developing a dizzying array of new technologies. In fact, there are more new and innovative technologies than ever before. And the list is countless. At least from my vantage point, I have come up with my own list of the top five technologies to watch in 2015 and beyond. They are listed in alphabetical order. (See below). Obviously, there are more than just five technologi... » read more

Executive Insight: Elmar Platzgummer

By Mark LaPedus - 13 Nov, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss photomask and lithography trends with Elmar Platzgummer, chief executive of IMS Nanofabrication, an Austrian-based supplier of multi-beam e-beam tools for mask writing applications. SE: IMS has shipped the world’s first multi-beam e-beam system. Initially targeted for photomask writing, the tools are currently being tested in the field. How lon... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.