tag: multi-beam e-beam

Multi-Beam Mask Writing Finally Comes Of Age
By Mark LaPedus - 15 Nov, 2018 - Comments: 0

Elmar Platzgummer, chief executive of IMS Nanofabrication, sat down with Semiconductor Engineering to discuss photomask and mask writing trends. IMS, a subsidiary of Intel, is a supplier of multi-beam e-beam systems for photomask production. What follows are excerpts of that conversation. SE: For years, photomask makers have used single-beam e-beam tools to pattern or write the features on ... » read more

Masks, Models And Alternative Lithography
By Jan Willis - 19 Apr, 2018 - Comments: 0

Every February an outstanding group of eBeam luminaries gathers at events hosted by the eBeam Initiative during the SPIE Advanced Lithography conference. It was our 10th annual lunch with standing room only attendance again this year. It’s an honor to get to know some of these very talented people. We started producing videos for the community over five years ago to share more of their storie... » read more

The Evolution Of EUV
By Ed Sperling - 20 Apr, 2017 - Comments: 0

EUV systems are beginning to ship to large foundries in volume, setting the stage for one of the biggest leaps in technology the semiconductor industry has ever witnessed. ASML has emerged as the sole supplier in this market, but it has taken an entire ecosystem to develop EUV. It has taken billions of dollars of investment by ASML, along with enormous cash infusions by Intel and TSMC, contr... » read more

Inside Lithography And Masks
By Mark LaPedus - 05 Apr, 2017 - Comments: 3

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Gregory McIntyre, director of the Advanced Patterning Department at [getentity id="22217" e_name="Imec"]; Harry Levinson, senior fellow and senior director of technology research at [getentity id="22819" comment="GlobalFoundries"]; David Fried, chief technology officer at [getentity id="22210" e_name="Cove... » read more

Big Changes In Patterning
By Ed Sperling - 22 Feb, 2017 - Comments: 0

Aki Fujimura, CEO of [getentity id="22864" comment="D2S"], sat down with Semiconductor Engineering to discuss patterning issues at 10nm and below, including mask alignment, the need for GPU acceleration, EUV's future impact on the total number of masks, and what the re-introduction of curvilinear shapes will mean for design. SE: Patterning issues are getting a lot of attention at 10nm and 7n... » read more

More EUV Mask Gaps
By Mark LaPedus - 17 Nov, 2016 - Comments: 12

Extreme ultraviolet (EUV) lithography is at a critical juncture. After several delays and glitches, [gettech id="31045" comment="EUV"] is now targeted for 7nm and/or 5nm. But there are still a number of technologies that must come together before EUV is inserted into mass production. And if the pieces don’t fall into place, EUV could slip again. First, the EUV source must generate more ... » read more

Why EUV Is So Difficult
By Mark LaPedus - 17 Nov, 2016 - Comments: 23

For years, extreme ultraviolet (EUV) lithography has been a promising technology that was supposed to help enable advanced chip scaling. But after years of R&D, EUV is still not in production despite major backing from the industry, vast resources and billions of dollars in funding. More recently, though, [gettech id="31045" comment="EUV"] lithography appears to be inching closer to pos... » read more

Deploying Multi-Beam Mask Writers
By Mark LaPedus - 22 Sep, 2016 - Comments: 3

Elmar Platzgummer, chief executive of IMS Nanofabrication, sat down with Semiconductor Engineering to discuss the company’s deal with Intel, photomasks, multi-beam mask writer technology and other topics. What follows are excerpts of that conversation. SE: This has been a significant year for IMS for two reasons. First, Intel recently announced plans to acquire IMS. Second, at the recent ... » read more

What Happened To DSA?
By Mark LaPedus - 19 May, 2016 - Comments: 2

Directed self-assembly (DSA) was until recently a rising star in the next-generation lithography (NGL) landscape, but the technology has recently lost some of its luster, if not its momentum. So what happened? Nearly five years ago, an obscure patterning technology called [gettech id="31046" t_name="DSA"] burst onto the scene and began to generate momentum in the industry. At about that t... » read more

Where Is Next-Gen Lithography?
By Mark LaPedus - 11 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Greg McIntyre, director of the Advanced Patterning Department at Imec; Harry Levinson, senior fellow and senior director of technology research at GlobalFoundries; Uday Mitra, vice president and head of strategy and marketing for the Etch Business Unit and Patterning Module at Applied Materials; Naoya Haya... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy