What Is Spin Torque MRAM?

By Mark LaPedus - 17 Aug, 2017 - Comments: 0

The memory market is going in several different directions at once. On one front, the traditional memory types, such as DRAM and flash, remain the workhorse technologies. Then, several vendors are readying the next-generation memory types. As part of an ongoing series, Semiconductor Engineering will explore where the new and traditional memory technologies are heading. For this segment, P... » read more

New Embedded Memories Ahead

By Mark LaPedus - 25 Jan, 2017 - Comments: 0

The embedded memory market is beginning to heat up, fueled by a new wave of microcontrollers (MCUs) and related chips that will likely require new and more capable nonvolatile memory types. The industry is moving on several different fronts in the embedded memory landscape. On one front, traditional solutions are advancing. On another front, several vendors are positioning the next-generatio... » read more

Material And Process Challenges In A Changing Memory Landscape

By Er-Xuan Ping - 21 Jul, 2016 - Comments: 0

Moore’s Law has fueled the semiconductor industry’s growth for decades. But as the complexity of scaling increases, extending the economics of Moore’s Law is becoming a challenge. One example illustrating the challenges of maintaining the economic benefits of Moore’s Law is the difficulty of IC chip patterning. Today, this requires an expensive litho scanner, a complicated spacer and... » read more

Power/Performance Bits: May 24

By Jesse Allen - 24 May, 2016 - Comments: 0

Reducing MRAM chip area Researchers from Tohoku University developed a technology to stack magnetic tunnel junctions (MTJ) directly on the via without causing deterioration to its electric/magnetic characteristics. The team focused on reducing the memory cell area of spin-transfer torque magnetic random access memory (STT-MRAM) in order to lower manufacturing costs, making them more compe... » read more

What’s Next For DRAM?

By Mark LaPedus - 24 Feb, 2016 - Comments: 2

The DRAM business has always been challenging. Over the years, DRAM suppliers have experienced a number of boom and bust cycles in a competitive landscape. But now, the industry faces a cloudy, if not an uncertain, future. On one front, for example, [getkc id="93" kc_name="DRAM"] vendors face a downturn amid a capacity glut and falling product prices in 2016. But despite the business chal... » read more

Inside The MRAM

By Mark LaPedus - 17 Sep, 2015 - Comments: 0

Today, the industry is shipping various next-generation nonvolatile memory types, such as 3D NAND, MRAM and ReRAM. In fact, MRAM has been shipping for some time. To get a handle on MRAM, Semiconductor Engineering sat down to discuss the technology with Phillip LoPresti, president and chief executive of Everspin, a supplier of MRAMs. What follows are excerpts of that conversation. SE: Where ... » read more

Memory Hierarchy Shakeup

By Mark LaPedus - 16 Sep, 2015 - Comments: 0

It’s no secret that today’s memory chips and storage devices are struggling to keep up with the growing demands in data processing. To solve the problem, chipmakers have been working on several next-generation memory types. But most technologies have been delayed or fallen short of their promises. But after numerous delays, a new wave of next-generation, nonvolatile memories are finally ... » read more

MRAM Begins To Attract Attention

By Mark LaPedus - 19 Sep, 2013 - Comments: 0

By Mark LaPedus In the 1980s, there were two separate innovations that changed the landscape in a pair of related fields—nonvolatile memory and storage. In one effort, Toshiba invented the flash memory, thereby leading to NAND and NOR devices. On another front, physicists discovered the giant magnetoresistance (GMR) effect, a technology that forms the basis of hard disk drives, magnetores... » read more

Mixing Custom And Standard Parts

By Ed Sperling - 08 Aug, 2013 - Comments: 0

By Ed Sperling The amount of third-party and re-used IP content in an SoC is on the rise, but once a decision to buy vs. make has been made it doesn’t always stay that way. In fact, chipmakers are swinging the pendulum back and forth across a variety of chips, building IP themselves, standardizing on another vendor’s IP, then sometimes rolling it back the other way. The reasons are usua... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: STT-MRAM