Shortages, Challenges Engulf Packaging Supply Chain

By Mark LaPedus - 18 Feb, 2021 - Comments: 0

A surge in demand for chips is impacting the IC packaging supply chain, causing shortages of select manufacturing capacity, various package types, key components, and equipment. Spot shortages in packaging surfaced in late 2020 and have since spread to other sectors. There are now a variety of choke points in the supply chain. Wirebond and flip-chip capacity will remain tight throughout 2021... » read more

Week In Review: Manufacturing, Test

By Mark LaPedus - 31 Jul, 2020 - Comments: 0

Chipmakers and OEMs As reported, Intel this week reorganized its operations following delays with its 7nm technology. Intel is behind TSMC and Samsung in technology. As a result, TSMC’s foundry customers, such as AMD, Nvidia and others, are also pulling ahead of Intel. In addition, reports have surfaced that Intel will outsource some of its leading-edge chip production to TSMC. To solve t... » read more

Chiplet Momentum Rising

By Mark LaPedus - 26 Feb, 2020 - Comments: 0

The chiplet model is gaining momentum as an alternative to developing monolithic ASIC designs, which are becoming more complex and expensive at each node. Several companies and industry groups are rallying around the chiplet model, including AMD, Intel and TSMC. In addition, there is a new U.S. Department of Defense (DoD) initiative. The goal is to speed up time to market and reduce the cost... » read more

What’s Next For High Bandwidth Memory

By Mark LaPedus - 17 Dec, 2019 - Comments: 1

A surge in data is driving the need for new IC package types with more and faster memory in high-end systems. But there are a multitude of challenges on the memory, packaging and other fronts. In systems, for example, data moves back and forth between the processor and DRAM, which is the main memory for most chips. But at times this exchange causes latency and power consumption, sometimes re... » read more

Planning For Panel-Level Fan-out

By Mark LaPedus - 21 Nov, 2019 - Comments: 0

Several companies are developing or ramping up panel-level fan-out packaging as a way to reduce the cost of advanced packaging. Wafer-level fan-out is one of several advanced packaging types where a package can incorporate dies, MEMS and passives in an IC package. This approach has been in production for years, and is produced in a round wafer format in 200mm or 300mm wafer sizes. Fan-out... » read more

The Race To Next-Gen 2.5D/3D Packages

By Mark LaPedus - 23 Sep, 2019 - Comments: 4

Several companies are racing each other to develop a new class of 2.5D and 3D packages based on various next-generation interconnect technologies. Intel, TSMC and others are exploring or developing future packages based on one emerging interconnect scheme, called copper-to-copper hybrid bonding. This technology provides a way to stack advanced dies using copper connections at the chip level,... » read more

Challenges Grow For 5G Packages And Modules

By Mark LaPedus - 18 Jul, 2019 - Comments: 0

The shift to 5G wireless networks is driving a need for new IC packages and modules in smartphones and other systems, but this move is turning out to be harder than it looks. For one thing, the IC packages and RF modules for 5G phones are more complex and expensive than today's devices, and that gap will grow significantly in the second phase of 5G. In addition, 5G devices will require an as... » read more

What’s Next In Advanced Packaging

By Mark LaPedus - 20 Jun, 2019 - Comments: 3

Packaging houses are readying the next wave of advanced IC packages, hoping to gain a bigger foothold in the race to develop next-generation chip designs. At a recent event, ASE, Leti/STMicroelectronics, TSMC and others described some of their new and advanced IC packaging technologies, which involve various product categories, such as 2.5D, 3D and fan-out. Some new packaging technologies ar... » read more

Panel Fan-out Ramps, Challenges Remain

By Mark LaPedus - 05 Nov, 2018 - Comments: 0

After years of R&D, panel-level fan-out packaging is finally beginning to ramp up in the market, at least in limited volumes for a few vendors. However, panel-level fan-out, which is an advanced form of today’s fan-out packaging, still faces several technical and cost challenges to bring this technology into the mainstream or high-volume manufacturing. Moreover, several companies are d... » read more

Defect Challenges Growing In Advanced Packaging

By Mark LaPedus - 08 Oct, 2018 - Comments: 0

The current defect inspection systems for packaging are running out of steam for the latest advanced packages, prompting the need for new tools in the market. In response, several vendors are rolling out new defect inspection systems for use in various advanced packages, such as 2.5D/3D technologies and fan-out. The new defect inspection systems are more capable than the previous tools, but ... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?