tag: TSMC

Week In Review: Manufacturing, Test
By Mark LaPedus - 18 Feb, 2022 - Comments: 0

Chipmakers Intel has announced a definitive agreement to acquire Tower, a specialty foundry vendor, for approximately $5.4 billion. With the acquisition of Tower, Intel expands its efforts in the foundry business, and put its rivals on notice. With Tower, Intel gains access to mature processes as well as specialty technologies, such as analog, CMOS image sensor, MEMS, power management and RF. ... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 11 Feb, 2022 - Comments: 0

Fab tools Lam Research has rolled out a new suite of selective etch products for use in developing next-generation technologies, such as gate-all-around (GAA) transistors. In the fab, selective etch helps chipmakers with complex structures. These etch tools provide selective and precision etching without modifying or causing damage to other critical material layers. Composed of three new... » read more

Manufacturing Bits: Feb. 1
By Mark LaPedus - 01 Feb, 2022 - Comments: 0

Fab equipment cybersecurity In a major step to help provide security in the semiconductor manufacturing supply chain, SEMI has published the first cybersecurity specifications and standards for fab equipment. For some time, the semiconductor industry has been developing new cybersecurity standards for fab equipment in an effort to protect systems from potential cyberattacks, viruses, and IP... » read more

Next-Gen 3D Chip/Packaging Race Begins
By Mark LaPedus - 31 Jan, 2022 - Comments: 5

The first wave of chips is hitting the market using a technology called hybrid bonding, setting the stage for a new and competitive era of 3D-based chip products and advanced packages. AMD is the first vendor to unveil chips using copper hybrid bonding, an advanced die-stacking technology that enables next-generation 3D-like devices and packages. Hybrid bonding stacks and connects chips usin... » read more

Photomask Challenges At 3nm And Beyond
By Mark LaPedus - 25 Jan, 2022 - Comments: 1

Experts at the Table: Semiconductor Engineering sat down to discuss optical and EUV photomasks issues, as well as the challenges facing the mask business, with Naoya Hayashi, research fellow at DNP; Peter Buck, director of MPC & mask defect management at Siemens Digital Industries Software; Bryan Kasprowicz, senior director of technical strategy at Hoya; and Aki Fujimura, CEO of D2S. What f... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 21 Jan, 2022 - Comments: 0

Fabs Intel has announced plans for an initial investment of more than $20 billion in the construction of two new leading-edge fabs in Ohio. Planning for the first two factories will start immediately, with construction expected to begin late in 2022. Production is expected to come online in 2025. As part of the announcement, Air Products, Applied Materials, Lam Research and Ultra Clean Technol... » read more

200mm Shortages May Persist For Years
By Mark LaPedus - 20 Jan, 2022 - Comments: 2

A surge in demand for chips at more mature process nodes is causing shortages for both 200mm foundry capacity and 200mm equipment, and it shows no signs of letting up. In fact, even with new capacity coming on line this year, shortages are likely to persist for years, driving up prices and forcing significant changes across the semiconductor supply chain. Shortages for both 200mm foundry cap... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 14 Jan, 2022 - Comments: 0

Chipmakers, OEMs TSMC reported sales of $15.736 billion for the fourth quarter of 2021, up 5.7% sequentially. Net income grew 6.4% quarter-over-quarter. In the fourth quarter, shipments of 5nm accounted for 23% of total wafer revenues, while 7nm accounted for 27%. In the first quarter of 2022, TSMC’s sales are expected to be between $16.6 billion to $17.2 billion. TSMC also expects its 20... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 07 Jan, 2022 - Comments: 0

Fab tools A fire broke out this week within ASML’s factory in Berlin, Germany. The fire was quickly extinguished and no one was injured during this incident. The factory manufactures components for ASML’s lithography systems, including wafer tables and clamps, reticle chucks and mirror blocks. The fire took place on Jan. 3. On Jan. 7, ASML provided an update. "The manufacturing of DUV c... » read more

Expanding Advanced Packaging Production In The U.S.
By Mark LaPedus - 05 Jan, 2022 - Comments: 0

The United States is taking the first steps toward bringing larger-scale IC packaging production capabilities back to the U.S. as supply chain concerns and trade tensions grow. The U.S. is among the leaders in developing packages, especially new and advanced forms of the technology that promise to shake up the semiconductor landscape. And while the U.S. has several packaging vendors, North A... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy