tag: XPS

Speeding Up The R&D Metrology Process
By Mark LaPedus - 16 Jul, 2020 - Comments: 0

Several chipmakers are making some major changes in the characterization/metrology lab, adding more fab-like processes in this group to help speed up chip development times. The characterization/metrology lab, which is generally under the radar, is a group that works with the R&D organization and the fab. The characterization lab is involved in the early analytical work for next-generati... » read more

Metrology Challenges For Gate-All-Around
By Mark LaPedus - 16 Apr, 2020 - Comments: 3

Metrology is proving to be a major challenge for those foundries working on processes for gate-all-around FETs at 3nm and beyond. Metrology is the art of measuring and characterizing structures in devices. Measuring and characterizing structures in devices has become more difficult and expensive at each new node, and the introduction of new types of transistors is making this even harder. Ev... » read more

3D NAND Metrology Challenges Growing
By Mark LaPedus - 09 Apr, 2019 - Comments: 8

3D NAND vendors face several challenges to scale their devices to the next level, but one manufacturing technology stands out as much more difficult at each turn—metrology. Metrology, the art of measuring and characterizing structures, is used to pinpoint problems and ensure yields for all chip types. In the case of 3D NAND, the metrology tools are becoming more expensive at each iteration... » read more

FinFET Metrology Challenges Grow
By Mark LaPedus - 17 May, 2018 - Comments: 1

Chipmakers face a multitude of challenges in the fab at 10nm/7nm and beyond, but one technology that is typically under the radar is becoming especially difficult—metrology. Metrology, the art of measuring and characterizing structures, is used to pinpoint problems in devices and processes. It helps to ensure yields in both the lab and fab. At 28nm and above, metrology is a straightforward... » read more

Measuring FinFETs Will Get Harder
By Mark LaPedus - 19 Nov, 2015 - Comments: 2

The industry is gradually migrating toward chips based on finFET transistors at 16nm/14nm and beyond, but manufacturing those finFETs is proving to be a daunting challenge in the fab. Patterning is the most difficult process for finFETs. But another process, metrology, is fast becoming one of the biggest challenges for the next-generation transistor technology. In fact, [getkc id="252" kc_n... » read more

Inside X-ray Metrology
By Mark LaPedus - 19 Nov, 2015 - Comments: 0

Chipmakers are ramping up a new class of chip architectures, such as 3D NAND and finFETs. Measuring and characterizing the tiny structures in these technologies is a major challenge. It will not only take the traditional metrology tools, but also various X-ray techniques. To get a handle on X-ray metrology, Semiconductor Engineering recently discussed the trends with the following experts: ... » read more

Searching For 3D Metrology
By Mark LaPedus - 19 Mar, 2015 - Comments: 3

In the previous decade, chipmakers made a bold but necessary decision to select the [getkc id="185" kc_name="finFET"] as the next transistor architecture for the IC industry. Over time, though, chipmakers discovered that the finFET would present some challenges in the fab. Deposition, etch and lithography were the obvious hurdles, but chipmakers also saw a big gap in metrology. In fact,... » read more

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy