Understand the concept of debugging with “real time dump” using Verdi Transaction Debug Platform (Protocol Analyzer, nWave, nTrace).
Design problems that appear in the late phases of the development cycle can be extremely difficult to track down and debug, thus putting project schedules at risk. It’s not uncommon for an engineer to run the verification test on what appears to be the main design problem, only to find the problem in the dump. Traditional debug techniques don’t always help to localize the issue. This whitepaper presents the concept of debugging with “real time dump” using Verdi Transaction Debug Platform (protocol analyzer, nWave, nTrace) and show its benefits by taking a few generic USB protocol problem statements and solutions using the same tools, including how it can vastly reduce the amount of time needed to track down design problems. In addition, this paper introduces additional benefits available with Transaction and Protocol Analyzer, such as synchronization with signal and source code and running the tool in interactive mode.
Read more here.
100% inspection, more data, and traceability will reduce assembly defects plaguing automotive customer returns.
Engineers are finding ways to effectively thermally dissipate heat from complex modules.
Increased transistor density and utilization are creating memory performance issues.
Lots of unknowns will persist for decades across multiple market segments.
FPGAs, CPUs, and equipment receive funding in China; 98 startups raise over $2 billion.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
100% inspection, more data, and traceability will reduce assembly defects plaguing automotive customer returns.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Some of the less common considerations for assessing the suitability of a system for high-performance workloads.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Different interconnect standards and packaging options being readied for mass chiplet adoption.
Engineers are finding ways to effectively thermally dissipate heat from complex modules.
Disaggregation and the wind-down of Moore’s Law have changed everything.
Leave a Reply