category: Research: MDT

category: IoT, Security & Automotive

Manufacturing Bits: Jan. 7
By Mark LaPedus - 07 Jan, 2020 - Comments: 0

Beyond 5G chips At the recent IEEE International Electron Devices Meeting (IEDM), NTT and the Tokyo Institute of Technology presented a paper on a technology that could enable high-speed wireless devices beyond the 5G standard. Researchers have devised a 300GHz wireless transceiver (TRx) that supports a data rate of more than 100Gb/s. The device is based on a technology called indium phosph... » read more

Manufacturing Bits: Dec. 31
By Mark LaPedus - 31 Dec, 2019 - Comments: 0

GaN-on-SOI power semis At the recent IEEE International Electron Devices Meeting (IEDM), Imec and KU Leuven presented a paper on a gallium-nitride (GaN) on silicon-on-insulator (SOI) technology for use in developing GaN power devices. With GaN-on-SOI technology, researchers have developed a 200-volt GaN power semiconductor device with an integrated driver and fast switching performance. ... » read more

Manufacturing Bits: Dec. 23
By Mark LaPedus - 23 Dec, 2019 - Comments: 0

Gallium oxide transistors At the recent IEEE International Electron Devices Meeting (IEDM), Cornell University and Hosei University presented a paper on a gallium oxide vertical transistor with a record breakdown voltage. Crystalline beta gallium oxide is a promising wide bandgap semiconductor material, which is used for power semiconductor applications. Gallium oxide has a large bandgap of... » read more

Manufacturing Bits: Dec. 16
By Mark LaPedus - 16 Dec, 2019 - Comments: 0

Imec-Leti alliance At the recent IEEE International Electron Devices Meeting (IEDM), Imec and Leti announced plans to collaborate in select areas. The two R&D organizations plan to collaborate in two areas—artificial intelligence (AI) and quantum computing. Imec and Leti have been separately working on AI technologies based on various next-generation memory architectures. Both entitie... » read more

Manufacturing Bits: Dec. 9
By Mark LaPedus - 09 Dec, 2019 - Comments: 0

Metalens breakthroughs Using a conventional lithography system, Harvard has developed what researchers call an all-glass, centimeter-scale metalens. A metalens is a flat surface, which makes use of nanostructures to focus light. It’s a disruptive technology that could displace traditional glass-based lenses. Applications include virtual reality (VR) devices, biological imaging techniques ... » read more

Manufacturing Bits: Dec. 3
By Mark LaPedus - 03 Dec, 2019 - Comments: 0

Microscopic movie star Using a 3D printer and a scanning electron microscope (SEM), a group has created a short animated film featuring the world’s smallest 3D figurine. The stop motion film, called Stardust Odyssey, features a 3D human-like figurine with a height of 300 microns, or close to the size of a grain of dust. This beat the previous record for the smallest figure in a film. N... » read more

Manufacturing Bits: Nov. 25
By Mark LaPedus - 25 Nov, 2019 - Comments: 0

RF carbon nanotubes For years, the industry has been working on logic and memory devices based on carbon nanotubes, although these technologies remain in R&D. Now, there is a new device type using carbon nanotubes--RF. Startup Carbonics has developed an RF-based carbon nanotube technology that operates at frequencies over 100GHz. The technology exceeds the cutoff frequency of today�... » read more

Manufacturing Bits: Nov. 19
By Mark LaPedus - 19 Nov, 2019 - Comments: 0

World’s lightest foam Lawrence Livermore National Laboratory (LLNL) has developed what researchers say is the world’s lightest gold foam. LLNL has devised gold aerogel foam. The foam is light enough where it could be carried on the back of tiny insects. Applications for the technology include electronics, catalysis, sensors and energy conversion and storage. An aerogel is based on a ... » read more

Manufacturing Bits: Nov. 13
By Mark LaPedus - 13 Nov, 2019 - Comments: 0

Power beams The U.S. Naval Research Laboratory and PowerLight Technologies have demonstrated the ability to transmit energy using a long-range, free-space power beaming system. The system is being developed as part of the Power Transmitted Over Laser (PTROL) project. The system consists of two 13-foot-high towers. One tower consists of 2-kilowatt laser transmitter. The other tower consist o... » read more

Manufacturing Bits: Nov. 5
By Mark LaPedus - 05 Nov, 2019 - Comments: 0

Nanoliter measurements The National Institute of Standards and Technology (NIST) has developed an optofluidic measurement system that can measure the flow of liquids at the nanoliter scale. Targeted for the field of microfluidics, the system can measure the flow of liquids as small as 10 billionths of a liter per minute. A nanoliter (nL) is one billionth of a liter. A liter is 33.814 ounces... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy