category: Top Stories

category: IoT, Security & Automotive

How Testing MEMS, Sensors Is Different
By Jeff Dorsch - 10 Apr, 2017 - Comments: 2

When it comes to testing microelectromechanical system devices and sensors, sometimes you have to shake and bake. [getkc id="311" comment="MEMS"] and [getkc id="187" kc_name="sensors"] are physically different from standard ICs. They require a specific type of stimulus to get the required testing results. Most chips only need to have an electrical charge run through them to gauge their pass/... » read more

Electroplating IC Packages
By Mark LaPedus - 10 Apr, 2017 - Comments: 2

The electrochemical deposition (ECD) equipment market for IC packaging is heating up as 2.5D, 3D and fan-out technologies begin to ramp. [getentity id="22817" e_name="Applied Materials"]  recently rolled out an ECD system for IC packaging. In addition, Lam Research, TEL and others compete in the growing but competitive ECD equipment market for packaging. ECD—sometimes referred to as pl... » read more

MEMS: Improving Cost And Yield
By Ed Sperling - 13 Mar, 2017 - Comments: 2

MEMS devices inspire awe on the design side. On the test and manufacturing side, they evoke a different kind of reaction. These are, after all, the intersection of mechanical and electrical engineering—a joining of two miniature worlds that are the basis of some of the most complex technology on the planet. But getting these devices to yield sufficiently, understanding what does or does no... » read more

Quality Issues Widen
By Ed Sperling - 06 Mar, 2017 - Comments: 0

As the amount of semiconductor content in cars, medical and industrial applications increases, so does the concern about how long these devices will function properly—and what exactly that means. Quality is frequently a fuzzy concept. In mobile phones, problems have ranged from bad antenna placement, which resulted in batteries draining too quickly, to features that take too long to load. ... » read more

2.5D Adds Test Challenges
By Jeff Dorsch - 06 Mar, 2017 - Comments: 0

OSATs and ATE vendors are making progress in determining what works and what doesn't in 2.5D packaging, expanding their knowledge base as this evolves into a mainstream technology. A [getkc id="82" kc_name="2.5D"] package generally includes an ASIC connected to a stack of memory chips—usually high-bandwidth memory—using an [getkc id="204" kc_name="interposer"] or some type of silicon bri... » read more

What Next For OSATs
By Mark LaPedus - 06 Mar, 2017 - Comments: 0

Semiconductor Engineering sat down to discuss IC-packaging and business trends with Tien Wu, chief operating officer at Taiwan’s Advanced Semiconductor Engineering ([getentity id="22930" comment="ASE"]), the world’s largest outsourced semiconductor assembly and test (OSAT) vendor. What follows are excerpts of that conversation. SE: What’s the outlook for the IC industry in 2017? Wu:... » read more

OSAT Biz: Growth And Challenges
By Mark LaPedus - 08 Feb, 2017 - Comments: 0

Amid a challenging business environment, the outsourced semiconductor assembly and test (OSAT) industry is projected to see steady to strong growth in a number of packaging segments this year. Right now, the [getkc id="83" kc_name="OSATs"]—which provide third-party IC-packaging and test services—are seeing brisk demand for both legacy and advanced chip packages. In addition, IDMs continu... » read more

Chip-Package-Board Issues Grow
By Ann Mutschler - 06 Feb, 2017 - Comments: 0

As systems migrate from a single die in a single package on a board, to multiple dies with multiple packaging options and multiple PCB form factors, it is becoming critical to move system planning, assembly, and optimization much earlier in the design-through-manufacturing flow. This is easier said than done. Multiple tools and operating systems are now used at each phase of the flow, partic... » read more

Betting On Wafer-Level Fan-Outs
By Ed Sperling - 06 Feb, 2017 - Comments: 2

Advanced packaging is starting to gain traction as a commercially viable business model rather than just one more possible option, propelled by the technical difficulties in routing signals at 10nm and 7nm and skyrocketing costs of device scaling on a single die. The inclusion of a [getkc id="202" kc_name="fan-out"] package for logic in Apple's iPhone 7, based on TSMC's Integrated Fan-Out (... » read more

Logic Analyzers Never Die
By Jeff Dorsch - 06 Feb, 2017 - Comments: 0

Logic analyzers, long a mainstay of chip design, are finding new demand for IoT devices—and frequently in different forms than in the past. Once associated with big, bulky benchtop instruments, this technology has evolved significantly over the past 40 years. In some cases it has been moved into software, where the measurement results are more likely to be viewed upon a laptop screen or a ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy