New technical paper titled “Organic bipolar transistors” from researchers at Technische Universität Dresden, NanoP, Technische Hochschule Mittelhessen, University of Applied Science, and ALBA Synchrotron.
Abstract (Partial)
“Here we present organic bipolar transistors with outstanding device performance: a previously undescribed vertical architecture and highly crystalline organic rubrene thin films yield devices with high differential amplification (more than 100) and superior high-frequency performance over conventional devices. These bipolar transistors also give insight into the minority carrier diffusion length—a key parameter in organic semiconductors. Our results open the door to new device concepts of high-performance organic electronics with ever faster switching speeds.”
Find the open access technical paper here. Published June 2022.
Wang, SJ., Sawatzki, M., Darbandy, G. et al. Organic bipolar transistors. Nature 606, 700–705 (2022). https://doi.org/10.1038/s41586-022-04837-4.
Visit Semiconductor Engineering’s Technical Paper library here and discover many more chip industry academic papers.
100% inspection, more data, and traceability will reduce assembly defects plaguing automotive customer returns.
Engineers are finding ways to effectively thermally dissipate heat from complex modules.
Increased transistor density and utilization are creating memory performance issues.
Lots of unknowns will persist for decades across multiple market segments.
FPGAs, CPUs, and equipment receive funding in China; 98 startups raise over $2 billion.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
100% inspection, more data, and traceability will reduce assembly defects plaguing automotive customer returns.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Some of the less common considerations for assessing the suitability of a system for high-performance workloads.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Different interconnect standards and packaging options being readied for mass chiplet adoption.
Engineers are finding ways to effectively thermally dissipate heat from complex modules.
Disaggregation and the wind-down of Moore’s Law have changed everything.
Leave a Reply