tag: 2.5D

Plotting The Next Semiconductor Road Map
By Ed Sperling - 13 Jun, 2016 - Comments: 0

The semiconductor industry is retrenching around new technologies and markets as Moore's Law becomes harder to sustain and growth rates in smart phones continue to flatten. In the past, it was a sure bet that pushing to the next process node would provide improvements in power, performance and cost. But after 22nm, the economics change due to the need for multi-patterning and finFETs, and th... » read more

Electromigration: Not Just Copper Anymore
By Katherine Derbyshire - 31 May, 2016 - Comments: 2

While integrated circuit manufacturers have worried about electromigration for a long time, until recently most of their concerns have focused on the on-chip interconnects. The larger dimensions found in integrated circuit packages have, in most cases, improved heat dissipation, reduced current density, and eliminated most [getkc id="160" kc_name="electromigration"] risks. Over the last sev... » read more

The Trouble With MEMS
By Ed Sperling - 25 May, 2016 - Comments: 0

The advent of the Internet of Things will open up a slew of new opportunities for MEMS-based sensors, but chipmakers are proceeding cautiously. There are a number of reasons for that restraint. Microelectromechanical systems are difficult to design, manufacture and test, which initially fueled optimism in the MEMS ecosystem that this market would command the same kinds of premiums that analo... » read more

One-On-One: Dave Hemker
By Ed Sperling - 19 May, 2016 - Comments: 0

Dave Hemker, CTO at [getentity id="22820" comment="Lam Research"], sat down with Semiconductor Engineering to look at some of the key issues on the process and manufacturing side, and some of the key developments that will reshape the semiconductor industry in the future. What follows are excerpts of that conversation. SE: One of the big discussion topics these days is [getkc id="208" commen... » read more

Bridging the IP Divide
By Brian Bailey - 18 May, 2016 - Comments: 1

IP reuse enabled greater efficiency in the creation of large, complex SoCs, but even after 20 years there are few tools to bridge the divide between the IP provider and the IP user. The problem is that there is an implicit fuzzy contract describing how the IP should be used, what capabilities it provides, and the extent of the verification that has been performed. IP vendors have been trying to... » read more

The Evolving Thermal Landscape
By Ann Mutschler - 16 May, 2016 - Comments: 0

Managing heat in chips is becoming a precision balancing act at advanced nodes and with advanced packaging. While it's important to ensure that temperatures don't rise high enough to cause reliability problems, adding too much circuitry to control heat can reduce performance and lower energy efficiency. The most common approach to dealing with these issues is thermal simulation, which requir... » read more

No More Straight Lines
By Ed Sperling - 12 May, 2016 - Comments: 0

Shrinking features on a chip is no longer the only way forward, and in an increasing number of designs and markets, it is no longer the best way forward. Power and performance are generally better dealt with using different architectures and microarchitectures, and all of those provide the potential to reduce silicon area (cost). Cramming more transistors on a die and working around leakage... » read more

Power-Centric Chip Architectures
By Ed Sperling - 12 May, 2016 - Comments: 0

As traditional scaling runs out of steam, new chip architectures are emerging with power as the starting point. While this trend has been unfolding for some time, it is getting an extra boost and sense of urgency as design teams weigh a growing number of design challenges and options across a variety of new markets. Among the options are [getkc id="196" kc_name="multi-patterning"] and [getkc... » read more

2.5D Becomes A Reality
By Ed Sperling - 11 May, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss 2.5D and advanced packaging with Max Min, senior technical manager at [getentity id="22865" e_name="Samsung"]; Rob Aitken, an [getentity id="22186" comment="ARM"] fellow; John Shin, vice president at [getentity id="22903" e_name="Marvell"]; Bill Isaacson, director of ASIC marketing at [getentity id="22242" e_name="eSilicon"]; Frank Ferro, senior di... » read more

Why This Roadmap Matters
By Ed Sperling - 05 May, 2016 - Comments: 0

The semiconductor industry is now officially looking beyond PCs and servers, establishing metrics and guidance for existing and developing market segments rather than just focusing on how to get to the next process nodes. The IEEE's International Roadmap for Devices and Systems marks a fundamental shift in the industry. The uncertainty that has ensued ever since the introduction of 3D transi... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy