tag: Mentor Graphics

To 7nm And Beyond
By Ed Sperling - 21 Jul, 2016 - Comments: 4

Gary Patton, chief technology officer at [getentity id="22819" comment="GlobalFoundries"], and Thomas Caulfield, senior vice president and general manager of Fab 8, sat down with Semiconductor Engineering to discuss future directions in technology, including the next rev of FD-SOI, the future of Moore’s Law, and how some very public challenges will likely unfold. SE: What do you see as the... » read more

Introduction To Multi-Patterning
By Mentor, a Siemens Business - 20 Jul, 2016 - Comments: 0

Multi-patterning enables accurate lithographic resolution at today's most advanced nodes. Learn about the basics of this technology, and how it impacts your IC design and verification tasks and responsibilities. To read more, click here. » read more

Blog Review: July 20
By Jesse Allen - 20 Jul, 2016 - Comments: 0

Applied's Er-Xuan Ping addresses the challenges facing materials and processing in a changing memory landscape, and the opportunities that may arise. Cadence's Paul McLellan looks at teaching neural networks to perceive things more like humans do, through German traffic signs. Mentor's Colin Walls digs into managing timing and peripherals in embedded systems. Synopsys' Robert Vamosi ch... » read more

Can Verification Meet In The Middle?
By Brian Bailey - 20 Jul, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss these issues with; Stan Sokorac, senior principal design engineer for [getentity id="22186" comment="ARM"]; Frank Schirrmeister, senior group director for product marketing for the system development suite of [getentity id="22032" e_name="Cadence"]; Harry Foster, chief verification scientist at [getentity id="22017" e_name="Mentor Graphics"], Bernie... » read more

The Week In Review: Design
By Jesse Allen - 15 Jul, 2016 - Comments: 0

Tools Synopsys unveiled its next-generation ATPG and diagnostics solution, TetraMAX II. According to the company, the tool is an order of magnitude faster than the previous generation, reducing runtime from days to hours, as well as generating 25% fewer patterns. The new tool is also certified for the ISO 26262 automotive functional safety standard. It has been deployed by STMicroelectronics... » read more

SoC Power Grid Challenges
By Brian Bailey - 14 Jul, 2016 - Comments: 7

The consumption of power and dissipation of heat within large SoCs has received a lot of attention recently, but that is only part of the issue. Power also has to be reliably delivered onto and around the system. This is becoming increasingly difficult, and new nodes are adding to the list of challenges. "If we were building chips where there was only a single Vdd and Vss then it is not that... » read more

Implementation Limits Power Optimization
By Ann Mutschler - 14 Jul, 2016 - Comments: 3

Implementation is still the step that makes or breaks power budgets in chip design, despite improvements in power estimation, power simulations, and an increase in the number of power-related architectural decisions. The reason: All of those decisions must be carried throughout the design flow. “If implementation decides to give up, then it doesn't really matter at the end of the day,” s... » read more

Addressing The Challenges Of Automotive Motor Control
By Ahmed Eisawy - 14 Jul, 2016 - Comments: 0

By Andrew Talan and Ahmed Eisawy As you leave work today and enter the parking lot, you hit the unlock button on your car remote. Using the power lift to open the hatch back, you put your laptop bag in the back of the car. While seated in the car, you adjust your seat position and bump your driver-side mirror into a new position and then head for home. You probably don’t think much about y... » read more

Mixed-Signal/Low-Power Design
By Jeff Dorsch - 14 Jul, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss mixed-signal/low-power IC design with Phil Matthews, director of engineering at Silicon Labs; Yanning Lu, director of analog IC design at Ambiq Micro; Krishna Balachandran, director of low power solutions marketing at [getentity id="22032" comment="Cadence"]; Geoffrey Ying, director of product marketing, AMS Group, [getentity id="22035" e_name="Syno... » read more

Testbench Acceleration Performance Demystified
By Mentor, a Siemens Business - 13 Jul, 2016 - Comments: 0

Part 2 in a series of papers that demystify the performance of SystemVerilog and UVM testbenches when using an emulator for the purpose of hardware-assisted testbench acceleration. In these three papers, architectural and modeling requirements are described, followed by a recommended systematic approach for maximizing overall testbench acceleration speed-up and achieving your ultimate performan... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy